Split Button; Split Point; Lower Voice; Upper Voice - Kurzweil RE-110 Owner's Manual

Hide thumbs Also See for RE-110:

Table of Contents

All manuals and user guides at all-guides.com

SPLIT Button

Press the Split button to activate split mode. The Split button indicator will light.

Splits are an easy way to make one performer sound like two. When you play the keyboard,

your right hand plays one voice and your left hand plays another. To exit split mode, press the

Voice button.

While holding down the Split and Function buttons simultaneously, press any key of the

keyboard to set the split point. The split point is the point on the keyboard where the left sound

and right sound meet. The default split point set at the factory is F#3.

The Lower Voice is the Left Sound as described above. To select one of the 10 primary voices

as the lower voice, hold down the Split button then press and release a keyboard key between

C1 and A1. To select any of 32 available voices as the lower voice, hold down the Split

button then "enter" the voice's number (1~32) by pressing the number keys (C2~A2) then

press the "Enter" key (A#2), then release Split. See Page 12 for the voice list.

The upper voice in Split Mode is the same as the main voice. It's not necessary to select the

upper voice separately.

Split Button

Table of Contents