Download Print this page

Mitsubishi BV-1000 Installation And Operation Manual page 14

Advertisement

DISCONNECT THE ANTENNA WIRE FROM THE TV AND CONNECT IT TO THE ANT. A
TERMINAL ON THE REAR PANEL. OF THE VCR.
SINGLE ANTENNA FOR BOTH VHF AND UHF IS USED.
VHFNHF ANTENNA
Conned to ANT. A
Connect the antenna leads to the matching transformer and then the
extension cable as shown below.
Connect to ANT. A
SEPARATE VHF AND UHF ANTENNAS ARE USED.
UHF ANTENNA
VHF AN
[Bj
VHF antenna connecti o n
using 300 ohm flat twin leads
@
Connect the antenna leads to the matching transformer and then the
extension cable as shown below.
Insert leads under screws and tighten.

Advertisement

loading