User Interface - Tunturi FitCycle 30 User Manual

English

User interface

Functional button
MODE
- Press MODE button to select console functions;
TIME, SPEED, DISTANCE, ODOMETER, CALORIES,
PULSE.
- Push and hold for 4 seconds to reset: TIME,
DISTANCE, CALORIES and PULSE.
SET
Set the values for: TIME, DISTANCE, CALORIES and
PULSE, when not in scan mode.
- Press SET button to set console in goal input mode.
- Press MODE to select goal you like to set. (the
selected goal will blink when able to set value.)
- Press SET Button to higher the goal input, hold
SET button for 3 seconds to automatically higher
the value fast. Press SET button shortly to stop
Automatically higher the value.
- Press RESET button shortly to reset the changed
selected goal.
- Press MODE Button to active next optional goal to
be set.
1st goal to be set is: TIME
+ 1 min ( 1 ~ 99)
2nd goal to be set is: SPEED
cannot change ( max. 99,9 KM/H)
3rd goal to be set is: DIST
+ 0,5KM ( 0,5KM ~ 99,50KM )
4Th goal to be set is; ODO
cannot change ( max. 999,9 KM)
5th goal to be set is: CAL
+ 1 ( 1 ~ 999 )
6th Limit to be set is: PULSE
+ 1 ( 40 ~ 240 )
NOTE
• When you set a goals the set goal value will
count down in active mode.
• When goal is reached the console will notify by
4 dual acoustic beep signals. The reached value
will now count up starting from "0".
• You can set more than one goal, all goals will
notify when goal is reached.
• When you set a limit for pulse, the console will
notify by a continues triple acoustic beep signal
when exceed the set limit.
RESET
- Push and hold for 4 seconds to reset: TIME,
DISTANCE, CALORIES and PULSE.
NOTE
• ODOMETER can only be reset by a batteries
exchange.
Functions and operations
SCAN
Automatically scan functions for : TIME, SPEED,
DISTANCE, ODOMETER, CALORIES and
PULSE.
Each display will be hold 4 seconds
TIME
Automatically accumulates workout time when
exercising.
SPEED
Display current speed when exercising.
DISTANCE
Automatically accumulates the distance from exercise
when exercising.
CALORIE
Automatically accumulates calories burnt when
exercising.
ODOMETER
Automatically accumulates the Total distance for all
exercise sessions.
PULSE RATE
Display current heart rate if measured.
Before measuring your pulse rate, please place your
palms of your hands on both of your contact pads and
the monitor will show your current heart beat rate in
beats per minute(BPM) on the LCD after 6~7 seconds.
1 6