Table of Contents
Advertisement
DMX Mode
Allows the unit to be controlled by any universal DMX controller.
Select the Starting DMX Address
1.) Navigate the main menu to reach DMX Address, press <CONFIRM>.
2.) Use the <UP/DOWN> buttons to choose a starting DMX address ranging from
001-512, then press <CONFIRM> to save, or <RETURN> to exit.
DMX Channel Mode Selection
1.) Navigate the main menu to reach Fixture, and press <CONFIRM>.
2.) Use the <UP/DOWN> buttons to highlight DMX Mode, press <CONFIRM>.
3.) Now use the <UP/DOWN> buttons to highlight BAC (15CH), STD (18CH), or
EXT (38CH), and then press <CONFIRM> to save, or <RETURN> to exit.
Run Mode (DMX, Master/Slave, Auto, Sound Active)
1.) Navigate the main menu to reach Fixture, press <CONFIRM>.
2.) Use the <UP/DOWN> buttons to highlight Run Mode, press <CONFIRM>.
3.) Now use the <UP/DOWN> buttons to highlight DMX (DMX Mode), Sound
(Sound Active), or Host (M/S Mode), and then press <CONFIRM> to save.
4.) In M/S mode, the first fixture in the DMX chain is the master fixture, and the
following units will operate in unison with the master.
5.) Note: If the fixture is set to Host but is not connected with other fixtures to
run as master/slave, Auto Mode will be activated.
Pan/Tilt Invert
1.) Navigate the main menu to reach Fixture, press <CONFIRM>.
2.) Use the <UP/DOWN> buttons to highlight either Pan Invert or Tilt Invert,
then press <CONFIRM>.
3.) The default setting of the parameter is Close. To invert the Pan or Tilt, set the
parameter to Open, and press <CONFIRM> to save, or <RETURN> to exit.
Manual Adjustments
Allows individual adjustments to be made via the control panel menu.
1.) Navigate the main menu to reach Manual, press <CONFIRM>.
2.) Use the <UP/DOWN> buttons to highlight any function, press <CONFIRM>.
3.) Now use the <UP/DOWN> buttons change any values and press
<CONFIRM> to save, or <RETURN> to exit (see DMX Values In-Depth).
4.) Note: The available selections will change depending on the options that are in
the currently active DMX mode.
Information
Selecting this option allows access to the following information:
Time
1.) Time: Shows the current running time.
2.) Total Time: Shows the total running time of the fixture.
3.) Power Count: Shows the number of times the fixture has been powered on.
Sensor
1.) This menu item will give you information on the operating status of the Pan,
Tilt, and Zoom motors, as well as the Temperature and Fan sensors. When the
operating correctly TRUE is displayed, otherwise FALSE will be displayed.
Temperature
1.) Head Temp: Internal temperature of the moving head.
2.) Fan Speed: Shows the speed of the fan when it is active (in RPM).
Stiletto™ Ray-Z Manual Rev. A
Page 14
© 2019 Blizzard Lighting, LLC
Advertisement
Table of Contents
