Sony MKS-9011A Installation Manual page 15

3. Install the rack angle assembly (L) and the rack angle
assembly (R) on the MKS-9012A with the supplied six
screws (B4 x 12) .
Rack angle assembly (L)
B4 x 12
Rack angle assembly (R)
4. Install the MKS-9012A on the control console with the
supplied six screws (B5 x 8).
B5 x 8
Control console
CCP-9000A
MKS-9012A
B4 x 12
MKS-9012A
B5 x 8
5. Install the rack angle cover (L) and the rack angle
cover (R) removed in step 2 on the rack angle assem-
bly (L) and the rack angle assembly (R) respectively.
n
Fit the covers on the rear side first and push them on
the front side lightly to install.
6. Tighten the rack angle cover (L) and the rack angle
cover (R) using the screws removed in step 2.
7. Install the blank panels on the control console with the
supplied two screws (B5 x 20).
B5 x 20
Blank panel
B3 x 4
Rack angle
cover (L)
Front side Rack angle cover
B5 x 20
Blank
panel
B3 x 4
Rack angle
cover (R)
Rear side
1-9