Camera Test; Touch Screen; Illumination Test; Led's - Sony Ericsson P1i Test Instruction, Mechanical

4.2

Camera Test

To verify the camera functionality:
1. Select "Camera" from the "Service Tests" menu.
2. Open the camera shutter on the backside of the phone.
3. The camera function will now starts and are visible in the display.
4. Camera test starts with video camera and you can switch to check the 3,2 M pixel
camera by pressing "rear". Make sure that the contrast and light is OK.
5. To check the "Flash" press "flash" in the camera test.
6. Close the camera shutter to go back to the service tests menu.
4.3

Touch screen

To verify the touch screen functionality:
1. Select "Touch screen" from the "Service Tests" menu.
2. Use the stylus pen do hand writing check
3. Press the "#" key to go back to the service tests menu.
4.4

Illumination Test

To verify that the backlight and the Top LED are OK:
1. Select "illumination" from the "Service Tests" menu.
2. Check that the backlight on the LCD and the keyboard is toggle between on and
off.
3. Check also
4. Press the "Ok" key to go back to the service tests menu.
4.5

LED's

4. Select "Led's" from the "Service Tests" menu
5. Check that the led upper right corner is switching between red and green.
2/000 21-1/FEA 209 544/126 B
©
Company Internal Sony Ericsson Mobile Communications AB
Test Instruction, Mechanical
6(13)