Symbol ES3000 User Manual page 81

MST Region Version:
MST Config Digest:
Command:
Enable/Disable Global MSTP:
Set MSTP Protocol Version:
Cist Configuration:
Cist Basic Port Configuration:
Cist Advanced Port Config:
Set MSTI Region Name:
Set MSTI Region Version:
Designated Topology Info:
Regional Topology Info:
Configure the switch to ensure the SPT works properly. The Common Instant Spanning Tree
Configuration Menu enables the user to configure the switch-wide parameters, such as Cist Hello
Time, Cist Maximum Age, and Cist Forward Delay.
Like MST Region Name, the MST Region Version name is
required to be identical to other switches to have work
cross-switch.
Digest value of configuration data to increase the
security.
Enables or disables the switch-wide MSTP.
Sets the protocol to be one among SPT (Spanning
Tree), RSPT (Rapid Spanning Tree), and MSPT
(Multiple Spanning Tree).
Configure Common Instant Spanning Tree - a switch-
wide configuration.
Port Configuration on Common Instant Spanning Tree -
a switch-wide configuration.
Advanced Port Configuration on Common Instant
Spanning Tree - a switch-wide configuration.
Sets the region name.
Sets the region version.
Designated topology information includes Port, Trunk,
Link status, CIST Designated Root, CIST Designated
Cost, CIST Designated Bridge, and CIST Designated
Port.
Regional topology information includes Port, Trunk,
Link status, CIST Port Regional Root, CIST Port
Regional Path Cost.
Administration Console Access
3-57