5-100
ES3000 User Guide
dot1x control-direction
Use the dot1x control-direction command to impose dot1x authentication on either incoming or
outgoing traffic.
dot1x control-direction <direction>
S
D
YNTAX
ESCRIPTION
C
M
OMMAND
R
:
EFERENCE
M
:
ENU
E
:
XAMPLE
! Set Control direction Both on port 5
Switch(config)# interface fastethernet0/5
Switch(config-if)# dot1x control-direction both
Switch(config-if)#
: <direction>
:
Interface configuration
ODES
Cisco
both
The dot1x authentication is imposed only
on the incoming traffic
in
The dot1x authentication is imposed on
incoming and outgoing traffic