Symbol ES3000 User Manual page 267

dot1x re-authenticate
Use this command to re-authenticate on an 802.1X-authorized port.
dot1x re-authenticate
S D
YNTAX ESCRIPTION
D V :
EFAULT ALUE
C M :
OMMAND ODES
R :
EFERENCE
M :
ENU
E :
XAMPLE
! re-authenticate on port 3 now
Switch(config)# interface fastethernet0/3
Switch(config-if)# dot1x re-authenticate
Switch(config-if)#
dot1x init
Use the dot1x init command to display (initiate) status on an 802.1X-authorized port.
dot1x init
S D
YNTAX ESCRIPTION
D V :
EFAULT ALUE
C M :
OMMAND ODES
R :
EFERENCE
M :
ENU
E :
XAMPLE
! init on port 3
Switch(config)# interface fastethernet0/3
Switch(config-if)# dot1x init
Switch(config-if)#
: The dot1x re-authenticate command has no arguments or keywords.
Interface configuration
Cisco
: The dot1x init command has no arguments or keywords.
Interface configuration
Cisco
5-99
Command Line Interface