Symbol LS 2106 Product Reference Manual page 12

t Scan the Entire Symbol
s The scan beam must cross every bar and space on the symbol (as in the left bar
code below).
s The larger the symbol, the farther away you should hold the scanner.
s Hold the scanner closer for symbols with bars that are close together.
What Does The Beep Mean?
When you hear 1 beep (short high tone) it means data has been decoded successfully. If any
other beeps are heard, contact the technical person in charge of scanning.
When the symbol has been successfully decoded, you will hear a short, high-tone beep, and
the green decode LED will light.
For more specific information on the meanings of the various beeper sounds, refer to
Indications on page 3-7.
Right
0 1 2 3 4 5
Scanning with the LS 2106
Wrong
0 1 2 3 4 5
Beeper
2-3