Table of Contents
Advertisement
CLOSED CAPTION SYSTEM
You can view specially labeled (cc) TV programs,
movies, news, pre-recorded tapes with either a dia-
logue caption or text display.
By choosing the caption mode, you
CAPTION mode:
can watch dramas, movies and news while captioning
the dialogues and the contents of news.
By choosing the text mode, you can
TEXT mode:
watch half screen text information if you want.
You may get these captions or text information
1-2:
by selecting either "1" or "2". Caption "2" is used,
usually for a second language if available.
NOTE:
Not all programs are broadcast with closed captions.
Your television is designed to provide error free
closed captions from high quality antenna, cable and
VCR signals. Conversely, poor quality signals are
likely to result in caption errors or no captions at all.
Common signal conditions which may cause captions
errors are listed below:
•
Automobile ignition noise
•
Electric motor brush noise
•
Weak snowy reception on TV screen
•
Multiplex signal reception displaying picture ghosts
or airplane flutter.
•
Playback of poorly recorded or worn VCR tapes.
•
If the TV/VCR displays a black
box on the TV screen, this means
that the TV/VCR is set to the
TEXT mode. To clear screen,
select [CAPTION1], [CAPTION2]
or [OFF].
Make sure ...
•
TV/VCR is turned on.
1
Select "CAPTION"
Press the MENU button on the
remote control.
Press the PLAY/K or STOP/L but-
ton to point to "CAPTION".
2
Select your desired caption
menu
Press the F.FWD/B or REW/s but-
ton until your desired caption menu
appears. ([CAPTION1], [CAP-
TION2], [TEXT1] or [TEXT2])
3
Exit the caption setting mode
Press the MENU button on the remote control to
return to TV mode.
TO CANCEL THE CLOSED CAPTION SYSTEM
Repeat steps [1] and [2], select [OFF] using the
F.FWD/B or REW/s button. Press the MENU but-
ton on the remote control to return to TV mode.
WHEN THE CLOSED CAPTION MODE IS ON
The On-Screen Display will disappear after 5 seconds.
•
This is also true when the MUTE button is pressed,
and when the PAUSE/STILL button is pressed
while recording.
•
If there is a power failure of any kind, the unit will
retain its memory for this feature.
V-CHIP SET UP
Make sure ...
•
TV/VCR is turned on.
•
You have the TV/VCR remote control.
1
Press the MENU button on the
remote control.
Press the PLAY/K or STOP/L but-
ton to select "V-CHIP SET UP".
Then, press the F.FWD/B button.
2
Use the numbers on the remote
control to enter the access code.
•
For the first time set-up or in the
event the TV/VCR has lost power,
enter the default code of the numbers: 0000.
3
Press the PLAY/K or STOP/L but-
ton to select "TV RATING".
Then, press the F.FWD/B button.
– M E N U –
4
TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
Press the PLAY/K or STOP/L but-
CHANNEL SET UP
USER'S SET UP
ton to select "TV rating" that you
V-CHIP SET UP
LANGUAGE [ENGLISH]
B CAPTION [OFF]
wish to block.
ZERO RETURN
TIME SEARCH
•
When you select the rating catego-
ry and turn it [BLOCK], the higher rating will turn
[BLOCK] automatically. Also, the lower rating will
– M E N U –
TIMER PROGRAMMING
turn [VIEW] automatically.
PICTURE CONTROL
SETTING CLOCK
•
When you turn "TV-Y" to [VIEW], then all ratings
CHANNEL SET UP
USER'S SET UP
V-CHIP SET UP
will turn to [VIEW] automatically.
LANGUAGE [ENGLISH]
B CAPTION [CAPTION1]
ZERO RETURN
TIME SEARCH
Selection
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
- 15 -
V-CHIP SET UP
Select "V-CHIP SET UP"
Enter Access code
Select "TV RATING"
Blocking TV programs
Rating Category Explanations
Appropriate for all children
Appropriate for children seven and older
General Audience
Parental Guidance suggested.
Unsuitable for children under 14
Mature audience only
– M E N U –
TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
CHANNEL SET UP
USER'S SET UP
B V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
INDEX SEARCH
ACCESS CODE
_ _ _ _
– V-CHIP SET UP –
B TV RATING
MPAA RATING
CHANGE CODE
B TV–Y
[VIEW]
TV–Y7 (
)
[VIEW]
TV–G
[VIEW]
TV–PG (
)
[VIEW]
TV–14 (
)
[VIEW]
TV–MA (
)
[VIEW]
EN
1K09
Advertisement
Table of Contents
