Table of Contents
Advertisement
1
Select "CHANNEL SET UP"
Press the MENU button on the
remote control.
Press the PLAY/K or STOP/L but-
ton to point to "CHANNEL SET
UP".
Then, press the F.FWD/B button.
2
Select "ADD/DELETE CH"
Press the PLAY/K or STOP/L but-
ton to point to "ADD/DELETE
CH".
Press the F.FWD/B button.
3
Enter the desired channel number
Press the PLAY/K or STOP/L but-
ton until your desired channel num-
ber appears. (You can also use the
number buttons or the CHANNEL
K/L button to enter it) (Example:
CH8)
4
Delete (or add) it from (into) memory
Press the F.FWD/B or REW/s button. The channel
number changes to light red. The channel is deleted
from memory.
•
To delete another channel, repeat steps [3] and [4].
•
If you press the F.FWD/B or REW/s button
again, the channel is memorized again.
Added channel: Light blue.
Deleted channel: Light red.
5
Exit the channel setup mode
Press the MENU button on the remote control to
returns to TV mode.
NOTE: To confirm that channel(s) has been deleted
or added, press the CHANNEL K or L button.
SELECTING THE LANGUAGE
Make sure ...
•
Press the POWER button to turn on the TV/VCR.
NOTE: This function effects only the language on
the screen menu and not the audio source.
1
Select "LANGUAGE"
Press the MENU button on the
remote control.
Press the PLAY/K or STOP/L but-
ton to point to "LANGUAGE".
2
Select "ENGLISH" or "ESPAÑOL"= Spanish using
– M E N U –
the F.FWD/B or REW/s button.
TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
B CHANNEL SET UP
USER'S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
3
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
Press the MENU button on the remote control to
return to TV mode.
NOTE: If for some reason the menu is in Spanish,
– CHANNEL SET UP –
press the MENU button on the remote control, press
B ADD / DELETE CH (TV)
the PLAY/K button to point to "IDIOMA
AUTO PRESET
[ESPAÑOL]", then press the F.FWD/B button, then
press the MENU button on the remote control.
Select this feature and the TV/VCR's clock automati-
cally will advance one hour in April, then reverse one
hour in October.
08
When Daylight-Saving Time is ON, the clock will
change automatically as follows:
ADD / DELETE
•
First Sunday of April :
diately changes to 3 AM. Any timer programming
you have set to occur between 2 AM and 3 AM
will not record.
•
Last Sunday of October :
immediately changes to 1 AM.
Make sure ...
•
Press the POWER button to turn on the TV/VCR.
1
Press the MENU button on the
remote control.
Press the PLAY/K or STOP/L but-
ton to point to "SETTING
CLOCK".
Then, press the F.FWD/B button.
2
Press the PLAY/K or STOP/L but-
ton to point to "D.S.T.".
Then, press the F.FWD/B or
REW/s button until [ON] appears.
3
Press the MENU button on the remote control to
return to TV mode.
– M E N U –
TO CANCEL THE DAYLIGHT-SAVING
TIMER PROGRAMMING
PICTURE CONTROL
TIME
SETTING CLOCK
CHANNEL SET UP
USER'S SET UP
V-CHIP SET UP
Repeat steps [1] to [2], select [OFF] using the
B LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
F.FWD/B or REW/s button.
TIME SEARCH
- 13 -
Select "ENGLISH" or "ESPAÑOL"
Exit the Language mode
DAYLIGHT-SAVING TIME
At 2 AM the clock imme-
Select "SETTING CLOCK"
Set "D.S.T." (Daylight-Saving Time) to [ON]
Exit the Daylight-Saving Time mode
At 2 AM the clock
– M E N U –
TIMER PROGRAMMING
PICTURE CONTROL
B SETTING CLOCK
CHANNEL SET UP
USER'S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
– SETTING CLOCK –
AUTO CLOCK
[ON]
AUTO CLOCK CH SEARCH
AUTO CLOCK CH
[ 02 ]
MANUAL CLOCK SET
B D.S.T.
[ON]
EN
1K09
Advertisement
Table of Contents
