Clock Set Up (Auto / Manual) - Sylvania SRC2319 Owner's Manual

TO SELECT A DESIRED CHANNEL
You can select the desired channel by using the
CHANNEL K or L button on or directly pressing
the number buttons on the remote control.
Note for using the number buttons:
•
When selecting cable channels which are higher
than 99, press the +100 button first, then, press the
last two digits. (Example: to select channel 125,
first press the +100 button then press "2" and "5").
•
You must proceed single-digit channel numbers
with a zero (Example: 02 ... 09).
CLOCK SET UP
(AUTO / MANUAL)
The TV/VCR clock must be set correctly before
VCR timer recording is possible. It is suggested that
the clock be set manually when first setting up the
TV/VCR. Then, set to [on] the auto clock setting
which will periodically correct the setting if neces-
sary.
NOTE: If you cannot receive a station with time
signals, auto clock setting cannot be performed. Use
manual setting only.
MANUAL CLOCK SETTING
Make sure ...
•
The TV/VCR is turned on.
In the example below, the clock is to be set to:
DATE May 6th, 2003
SETTING TIME 5:40PM
1
Select "SETTING CLOCK"
Press the MENU button on the
remote control.
Press the PLAY/K or STOP/L
button to point to "SETTING
CLOCK".
Then, press the F.FWD/B button.
2
Select "MANUAL CLOCK
SET"
Press the PLAY/K or STOP/L
button to point to "MANUAL
CLOCK SET".
Then, press the F.FWD/B button.
3
Select the month
Press the PLAY/K or STOP/L
button until your desired month
appears. (Example: May → 05)
Then, press the F.FWD/B button.
4
Press the PLAY/K or STOP/L but-
ton until your desired day appears.
(Example: 6th → 06)
Then, press the F.FWD/B button.
5
Press the PLAY/K or STOP/L but-
ton until your desired year appears.
(Example: 2003)
Then, press the F.FWD/B button.
6
Press the PLAY/K or STOP/L but-
ton until your desired hour appears.
(Example: 5, PM)
Then, press the F.FWD/B button.
7
Press the PLAY/K or STOP/L but-
ton until the desired minute
appears. (Example: 40)
8
Press the MENU button on the
remote control.
Although seconds are not dis-
played, they begin counting from
00 when you press the MENU button on the remote
control. Use this feature to synchronize the clock
– M E N U –
TIMER PROGRAMMING with the correct time.
PICTURE CONTROL
B SETTING CLOCK
CHANNEL SET UP NOTE:
USER'S SET UP
V-CHIP SET UP
When unplugging the AC cord or if there is a power
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
failure for more than 3 seconds, you may have to
TIME SEARCH
reset the clock.
TO CHANGE CLOCK SETTING
– SETTING CLOCK –
If you want to change the clock,
AUTO CLOCK [ON]
1)Follow steps [1] and [2].
AUTO CLOCK CH SEARCH
AUTO CLOCK CH [ 02 ]
B MANUAL CLOCK SET
2)Select where you want to change using the
D.S.T. [OFF]
F.FWD/B or REW/s button.
3)Enter correct numbers using the PLAY/K or
STOP/L button.
4)Press the MENU button on the remote control to
start the clock.
– MANUAL CLOCK SET –
PLEASE NOTE:
MONTH DAY YEAR
0 5 / – – – – – – – – – If there is no local PBS station in your area or on
your cable system, select "AUTO CLOCK" and
HOUR MINUTE
– – : – – – –
press the F.FWD/B or REW/s button to turn [OFF]
this function. Then you can manually adjust the
clock.
- 11 -
Select the day
Select the year
Select the hour
Select the minute
Start the clock
– MANUAL CLOCK SET –
MONTH DAY YEAR
0 5 / 0 6 – – – – – – –
HOUR MINUTE
– – : – – – –
– MANUAL CLOCK SET –
MONTH DAY YEAR
0 5 / 0 6 TUE 2 0 0 3
HOUR MINUTE
– – : – – – –
– MANUAL CLOCK SET –
MONTH DAY YEAR
0 5 / 0 6 TUE 2 0 0 3
HOUR MINUTE
0 5 : – – PM
– MANUAL CLOCK SET –
MONTH DAY YEAR
0 5 / 0 6 TUE 2 0 0 3
HOUR MINUTE
0 5 : 4 0 PM
5:40 PM
EN
1K09