Table of Contents
Advertisement
This unit will operate with any cassette that has the
high-quality tapes. Do not use poor quality or damaged tapes.
PRECAUTIONS
•
Avoid moisture. Moisture condensation may occur
on the tape if it is moved from a cold place to a
warm place or vice versa. Before using a tape with
these conditions, to avoid damage of the tape and
your unit, wait until the tape has warmed to room
temperature and the moisture has evaporated.
•
Avoid extreme heat, high humidity and magnetic
fields.
•
Do not tamper with the cassette mechanism.
•
Do not touch the tape with your fingers.
TWO DIFFERENT TAPE SPEEDS
Before recording, select the tape speed from : SP mode
(Standard Play) or SLP mode (Super Long Play).
The table below shows the maximum recording/play-
back time using T60, T120 or T160 tapes in each mode.
Tape Speed
Recording/Playback Time
Type of tape
T60
SP mode
1 hour
SLP mode
3 hours
NOTE:
•
You can play back a tape recorded in LP mode
(Long Play).
VIDEO CASSETTE
T120
T160
2 hours
2-2/3 hours
6 hours
8 hours
- 17 -
mark. For best results, we recommend the use of
INSERTING A CASSETTE
Insert the cassette in the direction as shown. Push in
gently, but continuously, on the center-back of the
cassette until it is drawn into the unit. The unit will
automatically turn on.
Window
CORRECT
REMOVING A CASSETTE
1)In the stop mode, press [STOP/EJECT
the unit. The cassette will be ejected.
2)Pull the cassette out of the cassette compartment.
3)Store the cassette in its case as shown.
ERASE PREVENTION
You can prevent accidental
erasing of recording by
breaking off the tab on the
back edge of the cassette.
If you decide to record on
the tape again, cover the
hole with plastic tape.
NOTE:
•
If the cassette without tab is inserted, playback will
automatically start.
WRONG
] on
P P N N
Tab
Plastic Tape
EN
Advertisement
Table of Contents
