Operation 535Fbx - Husqvarna 535FBX Operator's Manual

7. Install the shaft to the knob on the frame.
8. Wind the cord around the load reducer and the shaft.
Attach the cord to the shaft.
Introduction
WARNING: Before you operate the product,
you must read and understand the safety
chapter.
To check before starting
1. Inspect the working area. Remove any objects that
could be thrown out.
2. Check the saw chain. Never use blunt, cracked or
damaged equipment.
3. Check that the product is in perfect working order.
4. Check that all nuts and screws are tight.
5. Make sure the chain is adequately lubricated, refer
To check the chain lubrication on page 28 .
to
1301 - 003 - 20.11.2019
9. Hang the throttle hand guard on the frame.

Operation 535FBX

6. Check that the saw chain always stops when the
engine is idling.
7. Only use the product for the purpose it was intended
for.
8. Make sure the handle and safety features are in
order. Never use a machine that has any parts
missing or has been modified in relation to the
specification.
Fuel
This product has a two-stroke engine.
CAUTION: Incorrect type of fuel can result in
engine damage. Use a mixture of gasoline
and two-stroke oil.
15