Table of Contents
Advertisement
Available languages
Available languages
Tips for Timer Recording
• If there is a power failure or the DVD/VCR has been unplugged for more than 30 seconds, the clock setting and all timer settings will be lost.
• If a tape is not in the DVD/VCR or does not have the record tab, the
insert a recordable tape.
• If a tape ends during timer recording, the VCR will stop, eject the tape, and switch to the DVD mode automatically as the
(If the DVD power is off, the VCR will become STANDBY status).
• When all timer recordings are finished, the
• When timer recordings are set, the
SET button so that the
continue with the other features as described in this manual.
If you want to use the DVD player during a VCR timer recording or while the
• You can use the DVD player while the
Press the DVD button on the remote control to choose DVD mode, then continue with the other DVD features as described in this manu-
al. You don't have to set the TIMER off to use the DVD only.
Copying a Video Tape
Warning: Unauthorized recordings of copyrighted video tapes may be an infringement of copyright laws.
(Back of another source)
AUDIO OUT
1
L
DVD/VCR
VCR
or
COMPONENT
AUDIO OUT
AUDIO IN
VIDEO OUT
ANT-IN
DIGITAL
AUDIO OUT
Y
L
L
Connect
R
C
R
R
B
VIDEO OUT
VIDEO IN
VIDEO OUT
ANT-OUT
C
R
Audio/Video cables
(supplied)
Tips
Tips
• For best results during dubbing, use the front panel controls whenever possible. The
remote control might affect another source's operation.
• Always use video-quality shielded cables with RCA-type connectors. Standard audio
cables are not recommended.
• You can use a video disc player, satellite receiver, or other audio/video component with
A/V outputs.
• "L1" or "L2" is found before the lowest memorized channel. (Example: CH02)
• "L2" input jacks are on the front of this DVD/VCR.
MTS System (Multi-Channel Television Sound)
When You Receive or Record a
Program Broadcast in MTS
• When you receive a broadcast on
the VCR, you can check the type
of the broadcast by pressing the
DISPLAY button.
• When "TV STEREO" or "SAP"
selection is valid, select them by
following steps. This selection is
needed when you record the pro-
gram.
• SAP means Second Audio
Program (usually second lan-
guage).
Display on the
Type of
TV screen
broadcast
Regular
-None-
(monaural audio)
Stereo
STEREO
broadcast
(main audio program)
Bilingual
SAP
broadcast
(second audio program)
Stereo &
(stereo main audio program)
STEREO
Bilingual
SAP
broadcast
(second audio program)
light will flash.
light will appears. To use the VCR as usual until the time for the recording, press the SUBTITLE/T-
light disappears. Press the VCR/TV button to choose the VCR position. Select either VCR or DVD mode, then
light is on or flashes, or during a timer recording. Press the POWER button to turn on the DVD.
(Back of Recording DVD/VCR*)
2
DVD
DVD/VCR
VCR
COMPONENT
AUDIO
S-VIDEO
AUDIO OUT
AUDIO IN
Connect
VIDEO OUT
OUT
OUT
ANT-IN
Y
L
L
L
C
R
R
B
COAXIAL
VIDEO OUT
VIDEO IN
R
ANT-OUT
C
R
RF cable
(supplied)
*Front input jacks are also available
VCR
VCR
VCR
1
1
MENU
or
2
2
To exit the menu.
CLEAR/
C. RESET
When You Play Back a Tape
STEREO/SAP
Recorded in Hi-Fi Stereo
Selection
-Invalid-
• If you have connected a stereo TV to
-Invalid-
this DVD/VCR, select "STEREO".
TV STEREO
• If you have connected a monaural TV
SAP
to this DVD/VCR, select "MONO".
TV STEREO
Your Selection
Type of recorded tape
SAP
non Hi-Fi tapes
Hi-Fi tapes
recorded in
Hi-Fi stereo
Hi-Fi tapes
recorded main
audio program
Hi-Fi tapes
recorded second
audio program
light flashes and timer recording cannot be performed. Please
light is on or flashes.
1) Insert a pre-recorded tape into the playing VCR.
(Back of TV)
2) Insert a tape with its record tab into the recording
DVD/VCR.
3) Press
the SPEED button on the remote control of the
recording DVD/VCR to select the desired recording
speed (SP/SLP).
4) Select the "L1" or "L2" position on the recording DVD/VCR.
• To use the input jacks on the back of this unit, select
"L1" position by pressing [0], [0], [1] on the remote
control or the CHANNEL buttons.
• To use the input jacks on the front of this unit, select
"L2" position by pressing [0], [0], [2] on the remote
control or the CHANNEL buttons.
5) Press the REC/OTR button on the recording DVD/VCR.
6) Begin playback of the tape in another source.
7) To stop recording, press the STOP/EJECT button on
the recording DVD/VCR, then stop playback of the tape
in another source.
VCR
VCR
-MENU-
TIMER PROGRAMMING
AUTO REPEAT [OFF]
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
AUDIO OUT
B TV STEREO
[ON]
SAP
Select "TV STEREO" or
"SAP"
STEREO
MONO
L-channel
R-channel
Monaural
Monaural
Monaural
L
R
L+R
Main audio
Main audio
Main audio
program
program
program
Second audio
Second audio
Second audio
program
program
program
– 13 –
light flashes.
VCR
VCR
VCR
VCR
VCR
1
1
MENU
-MENU-
TIMER PROGRAMMING
AUTO REPEAT [OFF]
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
B AUDIO OUT
TV STEREO
SAP
or
2
2
AUDIO OUT
B HIFI
or
MONO
Select "HIFI" or "MONO"
3
3
To exit the menu.
CLEAR/
C. RESET
[ON]
[ON]
EN
Advertisement
Table of Contents
