Sylvania ZV450SL8 Owner's Manual
  1. Manuals
  2. Brands
  3. Sylvania Manuals
  4. DVD VCR Combo
  5. ZV450SL8
  6. Owner's manual

Sylvania ZV450SL8 Owner's Manual

Digital video disc recorder with video cassette recorder
Hide thumbs Also See for ZV450SL8:
Table of Contents

Advertisement

Quick Links

TO RECEIVE DIGITAL/ANALOG SIGNAL, YOU MUST CONNECT ANTENNA.
IF YOU NEED ADDITIONAL ASSISTANCE WITH SETUP OR OPERATING AFTER
READING OWNER'S MANUAL, PLEASE CALL TOLL FREE 1-800-968-3429, OR
VISIT OUR WEB SITE AT http://www.SylvaniaConsumerElectronics.com
© 2007 Funai Electric Co., Ltd.
E9H10UD.indd 1
E9H10UD.indd 1
Digital Video Disc Recorder with
Video Cassette Recorder
ZV450SL8
INSTRUCCIONES EN ESPAÑOL INCLUIDAS
Owner's Manual
2007/02/19 14:55:06
2007/02/19 14:55:06

Advertisement

Table of Contents
loading

Related Manuals for Sylvania ZV450SL8

Summary of Contents for Sylvania ZV450SL8

  • Page 1 Digital Video Disc Recorder with Video Cassette Recorder Owner’s Manual ZV450SL8 INSTRUCCIONES EN ESPAÑOL INCLUIDAS TO RECEIVE DIGITAL/ANALOG SIGNAL, YOU MUST CONNECT ANTENNA. IF YOU NEED ADDITIONAL ASSISTANCE WITH SETUP OR OPERATING AFTER READING OWNER’S MANUAL, PLEASE CALL TOLL FREE 1-800-968-3429, OR VISIT OUR WEB SITE AT http://www.SylvaniaConsumerElectronics.com ©...

  • Page 2: Precautions

    PRECAUTIONS TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS WARNING: APPLIANCE TO RAIN OR MOISTURE. The lightning flash with arrowhead symbol, within an CAUTION equilateral triangle, is intended to alert the user to the RISK OF ELECTRIC SHOCK presence of uninsulated “dangerous voltage”...

  • Page 3: Important Safeguards

    PRECAUTIONS Important Safeguards 1. Read Instructions - All the safety and operating instructions information with regard to proper grounding of the mast and should be read before the appliance is operated. supporting structure, grounding of the lead-in wire to an 2.
  • Page 4 PRECAUTIONS Installation Location Supplied Accessories For safety and optimum performance of this unit: remote control (NB666UD) with batteries (AAx2) • Install the unit in a horizontal and stable position. Do not place anything directly on top of the unit. Do not place the unit directly on top of the TV.
  • Page 5 PRECAUTIONS Maintenance Servicing • Please refer to relevant topics on “TROUBLESHOOTING” Note on pages 96-100 before returning the product. • Remember to read the instructions along with the video • If this unit becomes inoperative, do not try to correct head cleaner before use.

  • Page 6: Table Of Contents

    CONTENTS Introduction SPECIAL PLAYBACK ....... . 59 Resume Playback ........59 PRECAUTIONS .

  • Page 7: Features

    FEATURES This unit not only plays back DVD, CD and VCR but also offers features for you to record on DVD and edit them after that. The following features are offered with this unit. Recording Editing DVD mode VCR mode DVD mode Deleting titles: You can delete titles which you do not need anymore.
  • Page 8 FEATURES Discs for Recording, Playing back Disc type DVD-RW DVD-R Logo Automatically Format Can be formatted in VR or video mode formatted in video mode Video Mode VR Mode Icon Maximum record 480 min (12cm) 480 min (12cm) 480 min (12cm) time 144 min (8cm) 144 min (8cm)
  • Page 9 FEATURES Discs for playing back Disc Type DVD-VIDEO CD-DA CD-RW CD-R Logo Icon Files for playing back Type of title JPEG Icon Media CD-RW/-R CD-RW/-R is a trademark of DVD Format/Logo Licensing Corporation. Color Systems DVD players with are capable of playing DVD-RW recorded in VR mode.

  • Page 10: Functional Overview

    FUNCTIONAL OVERVIEW Front Panel 20 19 18 17 11 10 9 8* 7 ( * ) The unit can also be turned on by pressing these buttons or insert a cassette tape. 1. Cassette compartment (VCR) 14. CHANNEL L / K buttons (DVD/VCR) Insert a cassette tape here.

  • Page 11: Rear Panel

    FUNCTIONAL OVERVIEW Rear Panel DVD/VCR DIGITAL AUDIO S-VIDEO COMPONENT S-VIDEO IN --- AUDIO --- OUT VIDEO OUT AUDIO OUT ANTENNA COAXIAL IN --- VIDEO --- OUT 1. AC Power Cord (DVD/VCR) 9 . COMPONENT VIDEO OUT jacks (DVD only) Connect to a standard AC outlet to supply power to this Use to connect a TV monitor with component video unit.

  • Page 12: Remote Control

    FUNCTIONAL OVERVIEW Remote Control Installing the Batteries in the Remote Control Using a Remote Control Install the batteries (AAx2) matching the polarity Keep in mind the following when using the remote control: indicated inside battery compartment of the remote • Make sure that there are no obstacles between the remote control.
  • Page 13 FUNCTIONAL OVERVIEW 1. DTV/TV button (DVD/VCR) 19. DISPLAY button (DVD/VCR) Press to switch between digital TV (DTV) mode and Press to display the display menu on or off. analog TV (TV) mode. 20. CLEAR button (DVD/VCR) 2. INPUT SELECT button (DVD/VCR) DVD mode: Press to select the appropriate input.

  • Page 14: Front Panel Display

    FUNCTIONAL OVERVIEW Front Panel Display BS CS 4. Current status of the unit : Appears when this unit is in DVD output mode. : Appears in the afternoon with : Appears when playback is : Appears when the timer the clock display. paused.

  • Page 15: Antenna Cable Connection

    ANTENNA CABLE CONNECTION This section describes how to connect your unit to an antenna, cable box, etc. Disconnect the power cord of your TV from the AC outlet. Disconnect RF coaxial cable from antenna input jack of your TV. VHF / UHF antenna rear of your TV RF coaxial cable...

  • Page 16: Rf Modulator Connection

    RF MODULATOR CONNECTION If your TV has antenna in jack only, it is still possible to connect this unit to your TV by using a stereo audio/video RF modulator. In this case, follow the instructions below. 1) Disconnect the power cords of the devices from the AC outlet. 2) Make the connection as illustrated below.

  • Page 17: Connection To A Cable / Satellite Box

    CONNECTION TO A CABLE / SATELLITE BOX 1) Disconnect the power cords of the devices from the AC outlet. 2) Make the connection as illustrated below. 3) Plug in the power cords of the devices to the AC outlet. S-video cable e.g.) RCA video cable rear of this unit...

  • Page 18: Connection To A Tv

    CONNECTION TO A TV Make one of the following connections, depending on the capabilities of your existing device. VCR and basic DVD connection RCA audio cable RCA video VIDEO cable AUDIO IN DVD/VCR this unit S-VIDEO IN --- AUDIO --- OUT DVD/VCR DIGITAL AUDIO...

  • Page 19: Connection To An Audio System

    CONNECTION TO AN AUDIO SYSTEM • When you change the connections, all devices should be turned off. • Refer to the manual accompanying external devices for more information. 2 Channel Analog Audio Connection Digital Audio Connection stereo system Dolby Digital decoder audio digital audio COAXIAL...

  • Page 20: The Vcr / Dvd Recorder Switching

    THE VCR / DVD RECORDER SWITCHING Because this product is a combination of a VCR and a DVD recorder, you must select first which component you wish to operate with [OUTPUT SELECT]. DVD mode VCR mode Press [DVD ] on the remote control. Press [VCR ] on the remote control.

  • Page 21: Guide To On-Screen Displays And Menus

    GUIDE TO ON-SCREEN DISPLAYS AND MENUS This unit uses the following on-screen displays and menus to guide you to the easy operations. The on-screen displays give you the information on the loaded disc, the disc/file in playback, etc. The menus allow you to change the various kinds of settings for playing back, recording, or editing to suite your preference. On-Screen Display / Menu The on-screen display changes in the following order as you press [DISPLAY].
  • Page 22 GUIDE TO ON-SCREEN DISPLAYS AND MENUS Disc Information / Menu DVD mode VCR mode 12:00AM 1/ 5 1/ 5 0:01:00 / 1:23:45 CH 10 0:00:00 HIFI 1:53 * This is an example screen only for explanation. * This is an example screen only for explanation. 1.

  • Page 23: Main Menu

    GUIDE TO ON-SCREEN DISPLAYS AND MENUS Main Menu Press [SETUP] to display the main menu. Then use 1. General Setting: [K / L] to select a menu and press [ENTER] to display the To go to general setting menu. menu. These menus provide entries to all main functions 2.

  • Page 24: Initial Setting

    INITIAL SETTING You need to follow these steps when you turn on this unit Press [POWER]. for the first time. Turn on the TV. Select the input to which the unit is connected. Use [K / L] to select your desired INPUT POWER POWER...

  • Page 25: Channel Setting

    CHANNEL SETTING If you have changed antenna connection, we recommend that you program available channels in your area with the following procedures. Auto Channel Scan Press [SETUP] and use [K / L] to select “General Setting”, then press INPUT [ENTER]. POWER OPEN/CLOSE SELECT...

  • Page 26: Adding / Deleting Channels

    CHANNEL SETTING Adding / Deleting Channels You may want to add or delete TV channels if your Press [DTV/TV] to select the mode channel lineup changes or if you no longer watch some channels. (DTV or TV) to/from which you want Adding channels is only available for the analog TV to add or delete channels.
  • Page 27 CHANNEL SETTING ANALOG DIGITAL Select the channel number to add or Select the channel number to delete. delete. • Only the major channel is displayed in “Manual Preset” menu. (The channel number displayed • Use [CH K / L] to cycle through only the in the parenthesis is a virtual channel number) memorized channels.

  • Page 28: Setting The Clock

    SETTING THE CLOCK Set the clock before you try the timer programming. If a PBS (public broadcasting station) is available in your area, follow “Auto Clock Setting” below. If not, follow “Manual Clock Setting” on page 29. Auto Clock Setting This unit can set the time and date automatically by Press [SETUP] and use [K / L] to referring to a PBS station.

  • Page 29: Manual Clock Setting

    SETTING THE CLOCK Manual Clock Setting Daylight Saving Time When “Daylight Saving Time” is “ON”, the unit clock will Press [SETUP] and use [K / L] to automatically adjust the time in order to fit the daylight select “General Setting”, then press saving time.

  • Page 30: Tuner Settings

    TUNER SETTINGS <Digital TV channels> Switching Analog Mode / Enter the major and minor channel number with [the Digital Mode Number buttons] to select a channel you want to watch. For 1-digit number You can easily switch the analog TV (NTSC) and digital TV e.g.) 2-2 ch: (ATSC) with the remote control.

  • Page 31: Selecting Tv Audio

    TUNER SETTINGS This section describes how to switch the TV audio. When you record a TV program, only the audio selected here will be recorded. (When recording an analog TV program to VR mode DVD-RW, both main and sub audio channels will be recorded,) Selecting TV Audio Digital TV Press [AUDIO] to cycle through...
  • Page 32 TUNER SETTINGS Selecting TV Audio (cont’d) Analog TV Press [SETUP] and use [K / L] to select “General Setting”, then press [ENTER]. INPUT POWER OPEN/CLOSE SELECT DTV / TV Use [K / L] to select “Channel”, then press [ENTER]. .@/: “Channel”...

  • Page 33: Dtv Closed Caption

    TUNER SETTINGS DTV Closed Caption Digital TV Apart from closed captions, Digital TV has its own closed Press [SETUP] and use [K / L] to captions called DTV CC. Use this menu to change the settings for DTV CC. select “General Setting”, then press [ENTER].

  • Page 34: Closed Caption Style

    TUNER SETTINGS Closed Caption Style Digital TV Digital TV can also change the style of its closed caption Press [SETUP] and use [K / L] to such as font, color or size, etc. select “General Setting”, then press [ENTER]. Use [K / L] to select “Display”, then INPUT POWER OPEN/CLOSE...
  • Page 35 TUNER SETTINGS Use [K / L] to select the item and <Font Color> switch the setting for each item you Font color of the displayed caption can be switched as below. want to set, then press [ENTER]. • When “User Setting” is set to “ON”, you can set General Setting the following items.

  • Page 36: Formatting A Disc

    FORMATTING A DISC Choosing the Recording Format of a Brand-New DVD-RW Press [SETUP]. When inserting a brand-new DVD-RW, the unit automatically starts to initialize the disc. DVD-RW will be formatted either video or VR mode according to the recording format mode setting of the Use [K / L] to select “DVD Menu”, unit.

  • Page 37: Reformatting A Disc Manually

    FORMATTING A DISC Reformatting a Disc Manually Insert a recordable disc. If you are using a DVD-RW, you can format the disc by performing “Format”. You can format DVD-RW for either Press [SETUP]. video mode recording or VR mode recording. Use [K / L] to select “DVD Menu”, then press [ENTER].

  • Page 38: Preparing A Disc

    PREPARING A DISC Setting for Auto Chapter Setting Aspect Ratio for Video Mode Recording You can set a specified time for chapter marks. 1) Press [SETUP] and use [K / L] to select “General You can set aspect ratio for video mode recording. Setting”, then press [ENTER].

  • Page 39: Setting A Disc To Protect

    SETTING A DISC TO PROTECT Press [SETUP]. To prevent accidental recording, editing or erasing the titles, you can protect them from “DVD Menu”. Use [K / ] to select “DVD Menu”, then press [ENTER]. INPUT POWER OPEN/CLOSE SELECT DTV / TV Use [K / L] to select “Disc Protect .@/: OFF ON”, then press [ENTER].

  • Page 40: Playing The Discs In Other Dvd Players

    PLAYING THE DISCS IN OTHER DVD PLAYERS Auto Finalizing Press [SETUP] and use [K / L] to select “General Setting”, then press You can finalize discs automatically using this function. You can use this function to finalize discs after finishing [ENTER].

  • Page 41: Finalizing A Disc

    PLAYING THE DISCS IN OTHER DVD PLAYERS Finalizing a Disc You will need to finalize discs to play back on other DVD Press [SETUP]. players. Finalizing may take several minutes up to an hour. Since the process of the finalization fills empty space of the disc, a shorter recording period on the disc will require a longer time period for finalization.
  • Page 42 PLAYING THE DISCS IN OTHER DVD PLAYERS To cancel finalizing... Note (DVD-RW only) • Finalizing a disc in video mode automatically creates Press [STOP C] during the finalizing is in progress. Use a DVD menu. [K / L] to select “Yes”, then press [ENTER]. Finalizing is •...

  • Page 43: Information On Dvd Recording

    INFORMATION ON DVD RECORDING Recording Speed Restrictions on Recording You can select a recording speed among 5 options, and You cannot record copy-protected program using this the recording time will depend on the recording speed unit. Copy-protected signal is included in DVD-videos and you select as follows.

  • Page 44: Basic Recording & One-Touch Timer Recording

    BASIC RECORDING & ONE-TOUCH TIMER RECORDING Follow the steps to record TV programs. Press [POWER]. Turn on the TV and be sure to select the input to which the unit is connected. Press [DVD ]. INPUT POWER POWER OPEN/CLOSE OPEN/CLOSE DTV / TV DTV / TV SELECT...
  • Page 45 BASIC RECORDING & ONE-TOUCH TIMER RECORDING Press [REC/OTR] to start recording. Press [STOP C] to stop recording. “I” will be displayed for 5 seconds. The recorded title will be included in the title list. (Refer to “Guide to a Title List” on page 68.) Wait for a moment.

  • Page 46: Timer Recording

    TIMER RECORDING You can program the unit to record up to 12 programs Guide to Timer Programming Display within a month in advance. Daily or weekly program recordings are also available. Before recording, make sure Timer Programming • Set the clock before setting a timer programming. JAN/ 2/07 12:00 AM 125-1 SP 2H (1:00) MON JAN/01 10:00AM...
  • Page 47 TIMER RECORDING Use [K / L / { / B] or [the Number Use [K / L] to select a recording buttons] to enter the start and end speed. time, then press [B]. Date Start JAN/02 12 : 00AM 1 : 00AM Date Start REC To...
  • Page 48 TIMER RECORDING Checking, canceling, or correcting the timer If the timer program did not complete correctly, programming information the error number appears in the timer pro- gramming list. 1) Press [T-SET]. will disappear on the front panel display. Timer Programming 2) Press [TIMER PROG.].

  • Page 49: Hints For Timer Recording

    TIMER RECORDING Hints for Timer Recording • If there is a power failure or this unit has been recording under such condition, cancel timer recording unplugged for more than 30 seconds, the clock setting by pressing [T-SET] during timer standby or stop and all timer programming will be lost.

  • Page 50: Settings For An External Device

    SETTINGS FOR AN EXTERNAL DEVICE Connection to an External Device Connect the external device properly to the unit by using input jacks either L2 (Front) or L1 (Rear). When connecting an external device of monaural output to this unit, use AUDIO L jack of L2 (Front). Use S-video or the RCA audio/video cables for this connection.

  • Page 51: Recording From An External Device

    SETTINGS FOR AN EXTERNAL DEVICE Recording from an External Device Before recording from an external device, refer to the instructions for the connection on page 50. Turn on the TV and press [POWER], and be sure to select the input of the TV to which the unit is connected.

  • Page 52: Dubbing Mode

    DUBBING MODE Press [SETUP] and use [K / L] to select “General Setting”, then press You can copy a DVD to a cassette tape or copy a cassette tape to a DVD. This function will be possible only if the [ENTER].
  • Page 53 DUBBING MODE VCR to DVD DVD to VCR Use [K / L] to select “VCR DVD”, Use [K / L] to select “DVD VCR”, then press [ENTER]. then press [ENTER]. General Setting General Setting Playback Playback Display Auto Chapter Display Auto Chapter Video Auto Finalize...

  • Page 54: Information On Playback

    INFORMATION ON PLAYBACK Structure of Disc Contents The contents of DVD are generally divided into titles, and the titles are subdivided into chapters. Audio CDs are divided into tracks. Data disc contains MP3/JPEG are divided into folders, and the folders are subdivided into files. DVD video Title: Divided contents of a DVD video disc.Roughly...

  • Page 55: Basic Playback

    BASIC PLAYBACK Direct Playback Press [POWER]. Turn on the TV and be sure to select the input to which the unit is connected. Press [DVD ]. INPUT POWER POWER OPEN/CLOSE OPEN/CLOSE Press [OPEN/CLOSE A] to open the SELECT DTV / TV disc tray and insert your disc with its .@/: label facing up.

  • Page 56: Playback From The Title List

    BASIC PLAYBACK Playback from the Title List Press [POWER]. Turn on the TV and be sure to select the input to which the unit is connected. Press [DVD ]. INPUT POWER POWER OPEN/CLOSE OPEN/CLOSE Press [OPEN/CLOSE A] to open the SELECT DTV / TV disc tray and insert your disc with its...

  • Page 57: Playing Back An Audio Cd And A Cd-Rw/-R With Mp3 / Jpeg Files

    BASIC PLAYBACK Playing Back an Audio CD and a CD-RW/-R with MP3 / JPEG Files Follow steps 1 to 2 in “Direct Playback” on page 55. Press [OPEN/CLOSE A] to close the INPUT POWER OPEN/CLOSE OPEN/CLOSE disc tray. SELECT DTV / TV It may take awhile to load .@/: .@/:...

  • Page 58: Using The Title / Disc Menu

    BASIC PLAYBACK Playing Back an Audio CD and a CD- Using the Title / Disc Menu RW/-R with MP3 JPEG Files (cont’d) Kodak Picture CD DVD may contain a title list, which describes the contents The Picture CD is a service to convert photographs taken of the disc, or a disc menu, which guides you through the by a conventional film camera into digital data and write available functions in the disc.

  • Page 59: Special Playback

    SPECIAL PLAYBACK Resume Playback Skipping TV Commercials During Playback You can play back from where you stopped playing back the disc last. Press [DVD ] first. 1) During playback, press [STOP C]. You can skip TV commercials to enjoy the recorded programs without interrupting.

  • Page 60: Rapid Playback

    SPECIAL PLAYBACK Rapid Playback Slow Forward / Slow Reverse Playback Rapid playback function is available only during Press [DVD ] first. playback. 1) During playback, press [PAUSE F]. Then press This function is available only on discs recorded in the [FWD D] or [REV E].

  • Page 61: Zoom

    SPECIAL PLAYBACK Zoom Marker Setting This feature allows you to assign a specific point on a disc Press [DVD ] first. to be called back later. 1) During playback, press [DISPLAY]. Press [DVD ] first. 1) During playback, press [DISPLAY]. 2) Use [{ / B] to select , then press [ENTER] within 1 second, or wait for 1 second to display the...

  • Page 62: Search

    SEARCH Title/Chapter Search Track Search Using [SKIP j ] / [SKIP i ] Using [SKIP ] / [SKIP Press [DVD ] first. Press [DVD ] first. 1) During playback, press [SKIP i] to skip the 1) During playback, press [SKIP i ] to skip the current track/file and move to the next.

  • Page 63: Time Search

    SEARCH Time Search Press [DVD ] first. 1) During playback, press [DISPLAY]. 2) Use [{ / B] to select , then press [ENTER]. e.g.) DVD-video 1/ 5 1/ 5 0:01:00 / 1:23:45 DVD Video e.g.) audio CD 1/ 5 0:00:15 / 0:05:00 The number next to will be highlighted.

  • Page 64: Slide Show

    REPEAT/RANDOM/PROGRAM PLAYBACK/SLIDE SHOW Repeat Playback Note • Point B for the repeat A-B playback should be set Available repeat function may vary depending the discs. within the same chapter or track of point A. Press [DVD ] first. • To cancel the repeat playback, select “OFF” at step 3. The repeat setting will also be canceled when you 1) During playback, press [DISPLAY].

  • Page 65: Program Playback

    REPEAT/RANDOM/PROGRAM PLAYBACK/SLIDE SHOW Program Playback Slide Show You can program the disc to play back in your desired You can select the display time between 5 seconds and order. 10 seconds. Press [DVD ] first. Press [DVD ] first. 1) Press [SETUP] in stop mode. 1) Follow steps 1 and 2 in “Program Playback”...

  • Page 66: Selecting The Format Of Audio And Video

    SELECTING THE FORMAT OF AUDIO AND VIDEO You can select the format of audio and video as you prefer depending on the contents of the disc you are playing back. Switching Subtitles Switching Audio Soundtrack DVD-video may have subtitles in one or more languages. When playing back a DVD-video recorded with 2 or more Available subtitle languages can be found on the disc soundtracks (these are often in different languages), you...

  • Page 67: Switching Virtual Surround System

    SELECTING THE FORMAT OF AUDIO AND VIDEO Switching Virtual Surround System Switching Camera Angles Some DVD-video have scenes shot from 2 or more You can enjoy stereophonic virtual space through your angles. Angle information should be on the disc case if existing 2 channel stereo system.

  • Page 68: Information On Disc Editing

    INFORMATION ON DISC EDITING Guide to a Title List Editing Discs Title list allows you to check the titles recorded on the Edit the recorded disc disc easily. You can choose a title to play back from this list and easily edit the titles as you prefer. You will find editing discs is easy.

  • Page 69: Deleting Titles

    DELETING TITLES Notes for deleting titles After the disc is fully recorded: DVD-RW DVD-R • When a title is deleted from • When the last title is deleted from • When a title is deleted from DVD-RW in VR mode, the DVD-RW in video mode, the recordable DVD-R, the recordable space recordable disc space will...
  • Page 70 DELETING TITLES You can delete titles which you do not need anymore. Please be advised that the titles once deleted cannot be Press [DVD ] first. brought back to the disc. In stop mode, press [TOP MENU]. Be sure to read “Notes for deleting titles” on page 69 Title list, original or playlist will appear.

  • Page 71: Creating/Deleting Playlist

    CREATING/DELETING PLAYLIST Adding Titles to a Playlist Follow the step 1 in “DELETING Playlist TITLES” on page 70 to display the For VR mode DVD-RW, you can create the playlist as you wish. original. You can add up to 99 titles to a playlist (as long as the total number of the playlist does not exceed 999 Use [K / L/ s / B] to select the chapters).

  • Page 72: Erasing All Playlist

    CREATING/DELETING PLAYLIST Erasing All Playlist Press [DVD ] first. Playlist A playlist can be deleted if it is no longer needed. Press [SETUP]. Main menu will appear. Use [K / L] to select “DVD Menu”, then press [ENTER]. INPUT POWER OPEN/CLOSE SELECT DTV / TV...

  • Page 73: Editing Discs

    EDITING DISCS Putting Names on Titles You can put a name on the disc and change it from this menu. Use [K / L] to select “Edit Title Name”, then press [ENTER]. INPUT POWER OPEN/CLOSE Edit SELECT DTV / TV Scene Delete .@/: Edit Title Name...
  • Page 74 EDITING DISCS Putting Names on Titles (cont’d) Guide to Edit Title Name 1) Use [K / L] to select a desired character set, then press [ENTER]. 2) Follow the list below, use [the Number buttons] INPUT POWER OPEN/CLOSE repeatedly until the desired letter appears. SELECT DTV / TV Select...

  • Page 75: Setting Or Clearing Chapter Marks

    EDITING DISCS Setting or Clearing Chapter Marks Follow steps 1 to 3 in “Putting Names Original Playlist on Titles” on page 73 to display “Edit” You can put chapter marks in each title. Once a chapter is marked, you can use it for the chapter search feature. menu.

  • Page 76: Deleting A Part Of A Title

    EDITING DISCS Deleting a Part of a Title Use [SKIP H / G], Original Playlist You can delete a specific part of a title. [REV E], [FWD D], [PLAY B] and Even when parts of title are deleted from the playlist, the [PAUSE F] to find the start point, original title will remain as it is.
  • Page 77 EDITING DISCS Use [K / L] to select “Delete” then press [ENTER]. Edit - Scene Delete Start Preview Delete JAN/ 1/07 12:00AM CH10 LP 1 : 40 : 00 Use [K / L] to select “Yes” then press [ENTER]. “Are you sure?” will appear. Select “Yes” using [K / L] and then press [ENTER].

  • Page 78: Dividing A Title

    EDITING DISCS Dividing a Title Press [DVD ] first. Playlist In stop mode, press [TOP MENU]. You can divide one title into 2 new titles. • For VR mode DVD-RW, press [MENU/LIST] to select “Playlist”. Use [K / L/ s / B] to select a desired INPUT POWER OPEN/CLOSE...

  • Page 79: Combining Titles

    EDITING DISCS Combining Titles Follow the steps 1 to 3 in “Dividing a Playlist Title” on page 78 to display “Edit” You can combine 2 titles into a single title. menu. Use [K / L] to select “Title Combining”, then press [ENTER]. INPUT POWER OPEN/CLOSE...

  • Page 80: Setting Or Releasing The Title Protection

    EDITING DISCS Setting or Releasing the Title Protection Follow the steps 1 to 3 in “Putting Original Names on Titles” on page 73 to To prevent the accidental editing, or erasing of the titles, display “Edit” menu. you can protect them in “Edit” menu. You can cancel the title protection feature after it is applied.

  • Page 81: Setting Or Clearing All Chapter Marks At Once

    EDITING DISCS Setting or Clearing All Chapter Marks at Once Follow the steps 1 to 3 in “Putting Names on Titles” on page 73 to For titles in video mode DVD-RW, you can set or edit chapter at every time interval. You can clear the chapter display “Edit”...

  • Page 82: List Of Settings

    LIST OF SETTINGS • The following table is the contents which you can set and the default settings. Refer to the following table for useful operation. • Your change to each settings stays on even when the power is off. •...
  • Page 83 LIST OF SETTINGS Setup Items (highlight is the default) Contents Display CC Style Font Opacity Set the font opacity of the displayed caption. Solid → page 35 Translucent Flash Font Color Transparent Set the font color of the displayed caption. →...

  • Page 84: Setups

    SETUPS Playback Press [STOP C] if you are playing back a disc. Press [SETUP] and use [K / L] to select “General Setting“, then press INPUT POWER OPEN/CLOSE OPEN/CLOSE SELECT DTV / TV [ENTER]. .@/: .@/: Use [K / L] to select “Playback”, then press [ENTER].
  • Page 85 SETUPS Playback (cont’d) Parental Lock (Default: All) A password has not been set yet. Some DVD-video feature a parental lock level. Playback Use [K / L] to select “Yes”, then press [ENTER]. Use will stop if the ratings exceed the levels you set, it will [the Number buttons] to enter a new password except require you to enter a password before the disc will for 4737, then press [ENTER].
  • Page 86 SETUPS Playback (cont’d) Audio Out Dolby Digital (Default : Stream) Choose the appropriate audio setting for your external device. Use [K / L] to select a setting, then press [ENTER]. It will only affect a disc playback. General Setting Use [K / L] to select a desired item, then press [ENTER]. Playback Display Parental Lock...
  • Page 87 SETUPS Playback (cont’d) Subtitle Language (Default : OFF) Angle Icon (Default : ON) Set the subtitle language. Set to “ON” to show the angle icon during the playback. Use [K / L] to select a language, then press [ENTER]. Use [K / L] to select a setting, then press [ENTER]. General Setting General Setting Playback...

  • Page 88: Display

    SETUPS Display Press [STOP C] if you are playing back a disc. Press [SETUP] and use [K / L] to INPUT POWER OPEN/CLOSE SELECT DTV / TV select “General Setting”, then press [ENTER]. .@/: .@/: Use [K / L] to select “Display”, then press [ENTER].
  • Page 89 SETUPS Display (cont’d) 1) Use [the Number buttons] to enter the access OSD Language (Default : English) password. Set the language for the on-screen display. If you have not set the password, first, use [the Number buttons] to set the access password, then press Use [K / L] to select a setting, then press [ENTER].

  • Page 90: Video

    SETUPS Video Press [STOP C] if you are playing back a disc. Press [SETUP] and use [K / L] to INPUT POWER OPEN/CLOSE select “General Setting”, then press SELECT DTV / TV [ENTER]. .@/: Use [K / L] to select “Video”, then press [ENTER].
  • Page 91 SETUPS Video (cont’d) Progressive (Default : OFF) TV Aspect (Default: 4:3 Letter Box) This unit is compatible with the progressive scan system. You can select the TV aspect ratio to match the formats of The feature provides you with the higher definition what you are playing back with the unit and your TV images than the traditional output system does.

  • Page 92: Reset All

    SETUPS Reset All Reset the setting to default. Press [SETUP] in stop mode and use [K / L] to select “General Setting”, then press [ENTER]. INPUT POWER OPEN/CLOSE Use [K / L] to select “Reset All”, then SELECT DTV / TV press [ENTER].

  • Page 93: Vcr Functions

    VCR FUNCTIONS Playback Recording 1) Press [POWER] on the remote control or the front Press [VCR ] first. panel of the unit. Before recording, make sure: When you are playing back a cassette tape, turn the TV • The appropriate external input position (L1/L2) to which on and be sure to select the input to which the unit is your external tuner is connected is selected by pressing connected.

  • Page 94: One-Touch Timer Recording (Otr)

    VCR FUNCTIONS One-touch Timer Recording (OTR) Index Search This feature allows you to set the recording length simply An index mark will be assigned at the beginning of each by pressing [REC/OTR] on the remote control. recording you make. You may skip to a specific marked point by following the steps below.

  • Page 95: Time Search

    VCR FUNCTIONS Time Search Other Operations This feature allows you to go to a specific point on a Press [VCR ] first. cassette tape by entering the exact amount of time you wish to skip in order to reach the point. Fast forward: When the unit is in stop mode, press [D] to fast forward Press [VCR...

  • Page 96: Troubleshooting

    TROUBLESHOOTING Before requesting service for this unit, check the table below for a possible cause of the problem you are experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation. Symptom Remedy The power does not turn on.
  • Page 97 TROUBLESHOOTING Symptom Remedy There is no picture. • If the main menu appears on the TV screen, press [RETURN ] to exit. • Check if the progressive scan mode is set correctly according to your TV (page 91). Picture noise appears. •...
  • Page 98 TROUBLESHOOTING Symptom Remedy “Repairing” appears on the TV screen. • If there is a power failure or unplugging during recording, finalizing, formatting or editing (even after “Repairing” disappears), a repairing process will begin automatically just after turning the unit on again. Repairing It may take several minutes up to about several hours.

  • Page 99: Error Message

    TROUBLESHOOTING Error message Cause Solution Disc Error • Unplayable disc is inserted in the unit. • Insert the standardized disc which have — Please eject the disc. — • The disc is upside down. the marks on pages 8-9. Playback feature may not be available on this disc. •...

  • Page 100: Frequently Asked Questions

    TROUBLESHOOTING Frequently Asked Questions – Can I record to CD-RW/-R? No, this unit records only DVD. – Can I play back DVD-video that is bought in another Possible when the region code of the disc is 1 and All. country? –...

  • Page 101: Language Code

    LANGUAGE CODE Language Code Language Code Language Code Abkhazian 4748 Hungarian 5467 Russian 6467 Afar 4747 Icelandic 5565 Samoan 6559 Afrikaans 4752 Indonesian 5560 Sangho 6553 Albanian 6563 Interlingua 5547 Sanskrit 6547 Amharic 4759 Interlingue 5551 Scots Gaelic 5350 Arabic 4764 Inupiak 5557...

  • Page 102: Glossary

    GLOSSARY Analog Audio PCM (pulse code modulation) An electrical signal that directly represents sound. The most common system of encoding digital audio, Compare this to digital audio which can be an electrical found on CD and DAT. Excellent quality, but requires a signal, but is an indirect representation of sound.

  • Page 103: Specifications

    SPECIFICATIONS • This model complies with the below specifications. • Designs and specifications are subject to change without notice. • This model may not be compatible with features and/or specifications that may be added in the future. General DVD-RW/-R, DVD-video, CD-DA, CD-RW/-R System VHS cassette tape VCR video heads...

  • Page 104: Español

    ESPAÑOL Discos grabables y reproducibles Tipo de disco DVD-RW DVD-R Logotipo Puede formatearse en modo VR o modo de Formateado Formato video automáticamente en modo de video Modo de video Modo VR 480 minutos 480 minutos 480 minutos Tiempo máximo de (12 centímetros) (12 centímetros) (12 centímetros)
  • Page 105 ESPAÑOL Conexión Básica 1) Desconecte el cable de alimentación de su televisor del tomacorriente de CA. 2) Efectúe la conexión básica ilustrada más abajo. parte trasera de este aparato DVD/VCR DVD/VCR DIGITAL AUDIO S-VIDEO COMPONENT S-VIDEO IN --- AUDIO --- OUT antena de AUDIO OUT VIDEO OUT...
  • Page 106 ESPAÑOL Configuración Inicial Grabación Básica Cuando usted encienda este aparato por primera vez Presione [DVD ]. necesita seguir estos pasos. Presione [OPEN/CLOSE A] para abrir la bandeja de discos e insertar su disco Presione [POWER]. con el rótulo aupntando hacia arriba. * Este aparato puede grabar a DVD-RW y Encienda el televisor.
  • Page 107 ESPAÑOL Grabación con Temporizador Usted puede programar el equipo para que grabe hasta 12 Presione [TIMER PROG.]. programas, con un mes de anticipación. También hay disponibles grabaciones de programas diarias o semanales. Antes de grabar, asegúrese de que • Antes de establecer una programación del temporizador Utilice [K / L] para seleccionar “Prog.

  • Page 108: Limited Warranty

    LIMITED WARRANTY FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanship as follows: DURATION: PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of original retail purchase.

Table of Contents