Hints For Timer Recording - Sylvania DVR90DEA Owner's Manual

Hints for timer recording

• If there is a power failure or this unit has been unplugged for more than 30 seconds, the clock setting and all timer set-
tings will be lost.
• If a disc is not on the tray, the
able disc.
• When all the timer recording is completed, the
button first, and then press PLAY B or OPEN/CLOSE A button.
• During timer recording or timer standby (
available.To make these operations available, cancel the timer recording or timer standby first (
• To cancel the timer standby mode, press POWER button.
The priority of overlapped settings
This unit records the programs according to priority if the timer programmings are overlapped.The timer programming
set previously has priority. A timer recording of lower priority will be canceled, start from the middle, or stop on the
way. Check the overlapped timer programmings and change the priority if necessary.
A programming set previously has priority
When the starting time is the same:
A program set previously (PROG. 1) has priority.
ex.1
PROG. 1
PROG. 2
Actual
recording
When the recording time is partially overlapped:
PROG. 1 will start after PROG. 2 is complete to be recorded.
PROG. 1
PROG. 2
Actual
recording
When the recording time is entirely overlapped:
PROG. 1 will not be recorded.
PROG. 1
PROG. 2
Actual
recording
When the end time of the programming currently being recorded and the starting time
of the one to be recorded sequentially are same:
The first 20-90 seconds of the programming to be recorded sequentially will be cut off.
PROG. 1
PROG. 2
Actual
PROG. 1
recording
36
Recording
Timer recording (cont'd)
indicator flashes and timer recording cannot be performed. Please insert a record-
indicator is on the front display), any operations on the unit will not be
PROG. 1 PROG. 2
PROG. 2 PROG. 1
PROG. 2
PROG. 2
The first 20-90 seconds will be cut off.
indicator flashes.To play or eject the recorded disc, press POWER
When some programming have been
made at the end time of the
programming currently being recorded:
A program set previously (PROG. 2) has priority.
ex. 2
PROG. 1
PROG. 2
PROG. 3
Actual
recording
indicator disappears).
PROG. 1 PROG. 2