Connection To An Audio System - Sylvania DVR90DEA Owner's Manual

• When you change the connections, all devices should be turned off.
• Refer to each owner's manual for further information on other devices.
Method 1
Stereo system
AUDIO
Audio cable
(supplied)
DVD Recorder
AUDIO OUT
Connections

Connection to an Audio System

Analog audio
input jacks
or
Method 2
Dolby Digital decoder,
MD deck or DAT deck
Audio Coaxial
Digital cable
(commercially
available)
DIGITAL
AUDIO OUT
Note
• If output is Dolby Digital encoded audio, connect to a
Dolby Digital decoder, and set "Dolby Digital" to
"Stream" for the "Digital Out" setting in the SETUP
menu. (Refer to pages 88-89.)
• The audio source on a disc in a Dolby Digital 5.1 channel
surround format cannot be recorded as digital sound by
an MD or DAT deck.
• Unless connected to a Dolby Digital decoder, set "Dolby
Digital" to "PCM" for the "Digital Out" setting in the
SETUP menu. Playing a DVD using incorrect settings may
generate noise distortion, and may also damage the speak-
ers. (Refer to pages 88-89.)
• Set "Dolby Digital" to "PCM" for the "Digital Out" set-
ting in the SETUP menu for connecting to an MD deck
or DAT deck. (Refer to pages 88-89.)
• By hooking this unit up to a Multi-channel Dolby Digital
decoder, you can enjoy high-quality Dolby Digital 5.1
channel surround sound as heard in the movie theaters.
Digital audio
input jack
COAXIAL
15