Connection To An Audio System; Rear Terminals - Sylvania DVL515 Owner's Manual

Connection to an Audio System

Method 1
Stereo system
AUDIO
Audio cable
(supplied)
This unit
(Analog)
AUDIO OUT
Setting
Connection
Connecting to Stereo System.
* To complete these settings, refer to pages 14-15.
Hint
Hint
• Playing a DVD using incorrect settings may generate noise
distortion and may also damage the speakers.

Rear Terminals

VIDEO OUT jack
Connect the supplied video cable (yel-
low) here through the TV's video in jack.
S-VIDEO OUT jack
Connect an optional S-Video cable here
through the S-video in jack of a TV.
Analog audio
input jacks
L R
SETUP > QUICK >
Connecting to a Dolby Digital decoder
for Dolby Digital audio output.
DOLBY DIGITAL
Connecting to the other equipment (an MD deck or
PCM
DAT deck etc.) without Dolby Digital decoder.
* To complete these settings, refer to pages 14-15.
Hint
Hint
• The audio source on a disc in a Dolby Digital 5.1 channel sur-
round format cannot be recorded as digital sound by an MD or
DAT deck.
• By hooking this unit up to a Multi-channel Dolby Digital decoder,
you can enjoy high-quality Dolby Digital 5.1 channel surround
sound as heard in the movie theaters.
• Playing a DVD using incorrect settings may generate noise dis-
tortion and may also damage the speakers.
– 7 –
Method 2
Dolby Digital decoder,
MD deck or DAT deck
Audio Coaxial
Digital cable
(commercially
available)
DIGITAL
AUDIO OUT
Setting
Connection
DIGITAL AUDIO OUT COAXIAL jack
Connect an optional coaxial digital audio
cable here through the coaxial digital
audio in jack of a decoder or audio
receiver.
AUDIO OUT jacks
Connect the supplied audio cable
(red/white) here through the audio in
jacks of a TV or other audio equipment.
COMPONENT VIDEO OUT jacks
Connect optional component video
cables here through the component
video in jacks of a television.
Digital audio
input jack
COAXIAL
SETUP > QUICK >
DOLBY DIGITAL
BITSTREAM
PCM
EN