Table of Contents
Advertisement
Connections
If your TV has AUDIO/VIDEO input jacks, see the following instructions. If not, see
the section "Before using your DVD player" on the front page.
Connection to a TV
Basic Audio
TV
R
Audio cable
(supplied)
AUDIO OUT
L
DVD player
DIGITAL AUDIO OUT
AUDIO OUT
L
Y
C
R
/P
R
COMPONENT
DIGITAL AUDIO OUT
VIDEO OUT
COAXIAL
R
VIDEO
C
B
/P
B
S-VIDEO
OUT
OUT
COAXIAL
(Analog) AUDIO OUT
Note
• Connect this unit directly to the TV. If the A/V cables are connected to a VCR, pictures may be distorted due to the copy protection system.
If your TV is compatible with progressive scanning (480p) and you want to enjoy
that high quality picture;
You must select the connection Method 3 above and progressive scanning mode. To set the mode,
press and hold the PLAY button on the front panel for more than 5 seconds, so that "P.SCAN" will
appear on the display of this unit.
If your TV is not compatible with progressive scanning;
Use this unit in interlace mode. Make sure that no "P.SCAN" is on the display of this unit. If not, press
and hold the PLAY button on this unit for more than 5 seconds, so that "P.SCAN" on the display of
this unit will disappear.
Connection to an Audio System
Method 1
Stereo system
AUDIO
Audio cable
(supplied)
DVD player
(Analog)
AUDIO OUT
Method 1
Good picture
AUDIO IN
L
VIDEO IN
Video
cable
(supplied)
VIDEO
OUT
R
VIDEO OUT
Analog audio
input jacks
R
L
AUDIO OUT
L
DIGITAL AUDIO OUT
COAXIAL R
Setup
Method 2
Better picture
S-VIDEO IN
S-Video
cable
(commercially
available)
S-VIDEO
OUT
S-VIDEO OUT
Method 2
Dolby Digital decoder,
MD deck or DAT deck
Audio Coaxial
Digital cable
(commercially
available)
DIGITAL
AUDIO OUT
Note
• If output is Dolby Digital encoded audio, connect to a Dolby
Digital decoder, and set "DOLBY DIGITAL" to "ON" in the
AUDIO menu. (Refer to pages 14-15)
• The audio source on a disc in a Dolby Digital 5.1 channel
surround format cannot be recorded as digital sound by an
MD or DAT deck.
• Unless connected to a Dolby Digital decoder, set "DOLBY
DIGITAL" to "OFF" in the AUDIO menu. Playing a DVD
using incorrect settings may genarate noise distortion, and
may also damage the speakers. (Refer to pages 14-15)
• Set "DOLBY DIGITAL" to "OFF" in the AUDIO menu for con-
necting to an MD deck or DAT deck. (Refer to pages 14-15)
– 6 –
Method 3
Best picture
COMPONENT
VIDEO IN
Y
C
C
B
R
Component
Video cables
(commercially
available)
Y
C
/P
R
R
COMPONENT
VIDEO OUT
VIDEO
C
B
/P
B
OUT
COMPONENT VIDEO OUT
[DVD]
POWER
SKIP
PLAY
SKIP
more than 5 seconds
[Interlace mode]
[Progressive scanning mode]
Digital audio
input jack
COAXIAL
AUDIO OUT
L
DIGITAL AUDIO OUT
COAXIAL
R
STOP
EN
Advertisement
Table of Contents
