Siemens SIMATIC Field PG P4 Manual page 88

Configuring the SIMATIC Field PG P4
Groups marked + can contain more than one device. When you select a group
marked in this way, hit Enter to view the list of devices in the group. See the figure
below for an illustration:
Fig. 5-14
This screen shows all possible boot devices; within a given group the highest
priority device is always listed first. Here again, you can change the sequence as
described above.
If a boot device is not available, the next device in the sequence is automatically
checked to ascertain whether or not it is bootable.
5-20
PhoenixBIOS Setup Utility
Main Advanced Security
–Removable Devices
Floppy Drive
–Hard Drive
FUJITSU MHM2100AT–(PM)
Alternate Device
CD–ROM Drive
Network Boot
Help Select Item
F1
ESC Exit Select Menu
The "Boot" Menu
Power Boot Version
Item Specific Help
Keys used to view or
configure devices:
<Enter> expands or
collapses devices with
a + or –
<+> and <–> moves
the device up or down.
+ / – Change Values F9
Enter Select
Sub-Menu F10
SIMATIC Field PG P4 Manual
Exit
Setup Defaults
Save and Exit
A5E00180080-04