Siemens SIMATIC Field PG P4 Manual page 113

Notice
By default, drive C: is used for the data transfer (Recovery).
Ensure that there is an available disk space of approximately 500 MB left on drive
C: after the selected recovery data have been copied.
8. Confirm the end massage box.
9. Start the Windows setup program
LW:\I386\WinNT.exe
LW is the drive where the recovery data have been copied.
10.Now follow the screen instructions.
Choosing the Language for Windows 2000
The Multilanguage User Interface (MUI) allows you to set the Windows 2000
menus and dialogs to another language. This function is only available with the
english version of Windows 2000.
In order to install the MUI, run the program MUISETUP.EXE in the MUI folder on
the Recovery CD and follow the screen dialog to install the desired languages.
The desired language for Windows 2000 menus and dialogs, as well as the
keyboard layout can be set via the control panel with the dialog Start > Settings >
Control Panel > Regional Options > tab "General" > box "Menus and
dialogs" and in the tab "Inputs", box "Keyboard layout" .
In addition to the language for menus and dialogs, you can also set via Regional
Options the standard for the region with Set Default.
Your device is set to English menus and dialogs and a US keyboard when
delivered. You can set another language and keyboard via the control panel with
the dialog Start >Settings > Control Panel > Regional Options > tab "General",
box "Menus and dialogs"> tab "Input locales", box "Input language".
SIMATIC Field PG P4 Manual
A5E00180080-04
Reinstallation of the Software
8-9