Check Before Starting; Personal Safety - Husqvarna 520iRX Operator's Manual

power tool or battery-operated
(cordless) power tool.

Check before starting

Always remove the battery to
•
prevent the product being
started by accident. Always
remove the battery before any
maintenance on the product.
Before using the product and
•
after any impact, check for
signs of wear or damage and
repair as necessary.
Inspect the working area.
•
Remove all loose objects,
such as stones, broken glass,
nails, steel wire, string etc.
that could be thrown out or
become wrapped around the
cutter or cutter guard.
Check the motor for dirt and
•
cracks. Clean off grass and
leaves from the engine using
a brush. Gloves should be
worn when necessary.
Check that the trimmer head
•
is completely attached to the
trimmer.
Check that the product is in
•
perfect working order. Check
that all nuts and screws are
tight.
Check that the trimmer head
•
and trimmer guard are not
757 - 001 - 24.10.2018
damaged or cracked. Replace
the trimmer head or trimmer
guard if the have been
exposed to impact or are
cracked. Always use the
recommended guard for the
cutting attachment you are
using. See chapter on
Technical data.
The product operator must
•
ensure that no people or
animals come closer than 15
meters while working. When
several operators are working
in the same area the safety
distance should be at least 15
meters.
Carry out an overall
•
inspection of the product
before use. See the
maintenance schedule.
National or local regulations
•
may regulate the use. Comply
to given regulations.

Personal safety

The cutting tool does not stop
•
immediately after the product
is turned off.
The product is only designed
•
for trimming.
Keep bystanders away.
•
Stay alert, watch what you
•
are doing and use common
sense when operating a
5