Hoshizaki FM-600AHE Installation Manual page 2

IMPORTANT
1. In order to carry out safe and proper
installation of the product, please read this
booklet carefully beforehand and follow the
instructions contained within.
2. O n c o m p l e t i o n o f t h e i n s t a l l a t i o n ,
start up the icemaker to check for any
abnormalities, and instruct the user on
how to use and maintain the icemaker in
accordance with the Instruction Manual.
3. This booklet should be handed over to the
user after the installation and be preserved
by the user together with the Instruction
Manual for any further consultation that
may be necessary.
WARNING
T he in s t a lla t ion m us t be c a r r ie d out
by qualified personnel, in accordance
with current regulations, according to the
manufacturer's instructions.
1. UNPACKING
WARNING
Children should not be allowed in reach of
the packaging elements (plastic bags and
expanded polystyrene) as they are potential
sources of danger.
CAUTION
1. Do not lift or manoeuvre the carton by
using the shipping bands.
2. Remove shipping carton, tape(s) and
packing. If packing material is left in the
icemaker, it will not work properly.
Power Supply Cord
Top Panel
Air Filter
Louver
Front Panel
Fig. 1
Note: T h i s i c e m a k e r n e e d s a S t o r a g e B i n .
1) After removing the packaging, make sure that
2) Remove the shipping tape holding the panels.
3) Remove the Front, Top and Side Panels. See
4) Remove the package of accessories, and check
Operation Panel
Louver 5) Remove the protective plastic film from the
(FM-600/FMN-440)
1
T h e r e c o m m e n d e d S t o r a g e B i n i s
HOSHIZAKI ICE STORAGE BIN, Model
B-300SD(PD) or B-500SD(PD) with Top Kit
- 8C, B-700SD(PD) with Top Kit - 22C, or
B-900SD(PD) with Top Kit - 22C and Top Kit
- 8C.
the icemaker and the Storage Bin are in good
condition. If in doubt, please do not use the
equipment but apply to professionally qualified
personnel. See the instruction sheet attached to
the Storage Bin for its unpacking and installation
guidelines.
Fig. 2.
Front Panel
Top Panel: Remove the screw(s). Lift off.
Front Panel: Remove the screw. Lift up and pull
toward you.
Side Panel: Remove the screw. Pull slightly
toward you, and lift off.
Fig. 2
the contents:
a) Installation Kit
[Air-Cooled Model]
Inlet Hose
Outlet Hose
[Water-Cooled Model]
Inlet Hose
Outlet Hose
1/2-3/4 Nipple
3/4-3/8 Nipple
b) Mounting Bracket
panels. If the icemaker is exposed to the sun
or to heat, remove the film after the icemaker
cools.
ENGLISH
Top Panel
Side Panel
1
2
2
3
1
1
2