Screen Mirroring (Android/Windows - Miracast®); Screen Mirroring (Ios) - Kodak LUMA 350 User Manual

23. SCREEN MIRRORING (ANDROID/WINDOWS - MIRACAST®)
1. From the projector home screen, select "Source," select "Screen Mirroring," and then select
"Miracast®". The name of the projector will be displayed on the screen so that you can accurately
identify it when attempting to connect.
2. Make sure your device is connected to the same network as your projector.
3. Activate the screen mirroring software on your device.
a. To activate screen mirroring on your Android™ device:
i. On Samsung devices, swipe down from the top notification bar to the expanded view,
and then swipe left (if necessary) and touch the "SmartView" icon to activate screen
sharing.
NOTE: Check your device settings for the screen casting/screen mirroring options. The name of the
function may vary by device model and service carrier. Other names used may include, "Cast," or
"Screen Mirroring," as well as "Smart View". All devices must be running at least Android version 4.1.2.
b. To activate screen mirroring on your Windows® 10 device:
i. From the start menu, select "Settings."
ii. In the Settings menu, select "Devices."
iii. On the left side of the Devices menu, select "Connected Devices," and then click
"Add a Device."
4. Select the projector from the list of devices and select "Connect." A dialog box will pop up on the
projector screen for you to confirm the connection; use the arrows or the remote to highlight
"Accept" and press the confirm button.
5. Your screen will now be mirrored to the projector.
6. When finished, select Disconnect on your device.

24. SCREEN MIRRORING (IOS)

1. From the projector home screen, select "Source," select "Screen Mirroring," and then select
"AirPlay". The name of the projector will be displayed on the screen so that you can accurately
identify it when attempting to connect.
2. Make sure your device is connected to the same network as your projector.
13