Thermador Professional Pro Grand PRD36 Use And Care Manual page 13

Dual fuel ranges
Hide thumbs Also See for Professional Pro Grand PRD36:
Table of Contents

Advertisement

4. Position the racks correctly in the oven. The correct
rack position depends on the recipe and the cooking
mode. The rack positions are numbered from the
bottom of the oven, like an elevator. Rack position 3
is the most frequently used position. Place rack(s) in
the proper position before turning on the oven.
Figure 1: Main Oven Rack Positions
5. THERMADOR Full Access
standard on all models. Each gliding oven rack can
be pulled out and pushed back into the oven with
minimal effort — even while supporting a large turkey
or roast.
6. Ensure that the burner caps are correctly seated on
the burner bases of the range's cooktop (see
Figure 15 and Figure 16 on Page 15). Turn on each
burner to check for proper flame color. See "Flame
Description" on page 16 for details.
English 8
®
Oven Racks are
Always remove
before Self Clean
Figure 2: Full Access Oven Rack
IMPORTANT:
Always remove the Full Access oven racks before self-
cleaning the oven. If the gliding racks remain in the oven
during Self-Clean, lubricants in the glide mechanisms of
each rack will be lost and the finish will discolor.
To help prevent burns, NEVER remove or reposition the
oven racks while the oven is ON or while the oven is
cooling.
5 5
4 4
Placing Rack In Oven:
3 3
To insert a rack in the oven, hold the rack with the back rail
2 2
up toward the back. Place the safety hooks under the front
of the rail guides. Push the rack into the oven, lifting the
1 1
rack stops over the front of the rail guides. Slide the rack
into position.
When placing food on a rack, pull the rack out to the stop
position. The racks are designed to lock and not tilt while in
fully-extended position.
Removing Rack from Oven:
To remove or reposition a rack in the oven, pull the rack
toward the front of the oven. Lift up the front of the rack
over the safety stops and pull the rack from the oven.
IMPORTANT:
When placing the gliding rack in the oven, make sure the
front supports on the rack guides rest in the large slots at
the front corners of the rack, as shown. This is
necessary to keep the rack in the correct position while
fully inserted into the oven.
Figure 3: Side View of Rack on the Rack Guide
WARNING:
Side View
Side View
Side View

Advertisement

Table of Contents
loading

This manual is also suitable for:

Professional pro grand prd48Professional pro grand prd36

Table of Contents