Dometic CA2500 Instruction Manual page 27

_BA_CA2500.book Seite 27 Dienstag, 9. Februar 2010 3:50 15
Dometic CA2500
7.1 Remote control
All settings of the device (timer programming, temperature setting etc.) are
transmitted to the system by remote control.
The following control and display elements are available on the remote con-
trol for operating the system:
No. in
fig. 2, Explanation
page 2
6
On/Send button:
Press the On/Send button to switch it on and send the values
to the system.
8
Off button:
Press the Off button to switch off the unit.
7
Select button:
Press the Select button to set the time and set the timer.
5
Mode button:
Press the Mode button to switch between the fresh air supply,
heating, cooling or automatic operating modes.
3
Fan button:
Press the Fan button to switch between the low and high
blower levels or automatic.
1
Digital display:
Displays:
– Time
– Selected room temperature in °C
– Selected operating mode
– Selected blower level
– Symbol for the active timer program
2
+ button:
Button + increases the temperature.
4
– button:
Button - decreases the temperature.
Control panel
27