General Notes; Power Socket - BMW S 1000XR Rider's Manual

General notes

10
CAUTION
190
Use of other-make products
Safety risk
BMW Motorrad cannot exam-
ine or test each product of out-
side origin to ensure that it can
be used on or in connection
with BMW vehicles without
constituting a safety hazard.
Country-specific official author-
z
isation does not suffice as as-
surance. Tests conducted by
these instances cannot make
provision for all operating con-
ditions experienced by BMW
vehicles and, consequently,
they are not sufficient in some
circumstances.
Use only parts and accessor-
ies approved by BMW for your
vehicle.
BMW has conducted extens-
ive testing of the parts and ac-
cessory products to establish
that they are safe, functional and
suitable. Consequently, BMW
accepts responsibility for the
products. BMW accepts no li-
ability whatsoever for parts and
accessories that it has not ap-
proved.
All modifications must be in com-
pliance with legal requirements.
Make sure that the vehicle does
not infringe the national road-
vehicle construction and use reg-
ulations applicable in your coun-
try.
Your BMW Motorrad retailer can
offer expert advice on the choice
of genuine BMW parts, accessor-
ies and other products.
To find out more about
accessories go to:
bmw-motorrad.com/equip-
ment

Power socket

Connection of electrical
devices
You can start using electrical
devices connected to the mo-
torcycle's sockets only when
the ignition is switched on.
Cable routing
The cables from the power
sockets to the auxiliary devices
must be routed in such a way
that they do not impede the
rider.
The cable routing should not
restrict the steering angle or
obstruct handling.
The cables must not be
trapped.
Automatic shutdown
The power supply to
the socket is interrupted
automatically during the start
procedure.