Shift Light - BMW S 1000XR Rider's Manual

Hill Start Control function
( 155)
Setting up Hill Start
Control Pro
Switch on the ignition (
Navigate to Settings,
Vehicle settings.
Select HSC Pro.
To switch off Hill Start Control
Pro, select Off.
Hill Start Control Pro is deactiv-
ated.
To switch on manual Hill Start
Control Pro, select Manual.
Hill Start Control Pro can be
activated by forcefully operat-
ing the handbrake or footbrake
lever.
To switch on automatic Hill
Start Control Pro, select Auto.
Hill Start Control Pro can be
activated by forcefully operat-
ing the handbrake or footbrake
lever.
If the brake is actuated for
approximately one second
after the vehicle has come to
a standstill and the motorcycle
is on a gradient of at least 3%,
Hill Start Control Pro is auto-
64).
matically activated.
The selected setting remains
stored even after the ignition is
switched off.

Shift light

Switching gearshift light
on and off
Navigate to Settings,
Vehicle settings.
Switch Shift light on or off.
Setting shift light
Switch on the Shift light
function.
Navigate to Settings,
Vehicle settings,
Configuration (under

Shift light).

The following settings are avail-
able:
Start RPM
End RPM
Brightness
Frequency. A flashing fre-
quency of 0 Hz corresponds to
steady light.
Changes to brightness and the
flashing frequency are demon-
strated by the shift light with it
briefly lighting up or flashing.
4
89
z