Function Test - Genie Lift Guard GS-30 Operator's Manual Supplement

First Edition • First Printing

Function Test

Note: Perform this procedure from the platform
controls in an area free of obstructions.
1 Activate platform up. Move and hold the
contact alarm in any direction.
Platform up function stops, the beacons flash
and the alarm sounds.
2 While holding the contact alarm, release the
joystick. Activate platform up.
Platform up function resumes at a reduced
speed. The beacons flash and the alarm
sounds.
3 Release the joystick and the contact alarm.
Activate platform up.
Normal platform function speed resumes, the
beacons and alarm turn off.
4 Activate the drive function. Move and hold the
contact alarm in any direction.
Drive function stops, the beacons flash and the
alarm sounds.
5 While holding the contact alarm, release the
joystick. Activate drive.
Drive function resumes at a reduced speed.
The beacons flash and the alarm sounds.
6 Release the joystick and contact alarm.
Activate drive.
Normal drive function resumes, the beacons
and alarm turn off.
Part No. 1288739GT Lift Guard™ Contact Alarm
Operator's Manual Supplement
Introduction
3