Honda GX160UT2 Manual page 53

62Z4H000.book 8 ページ ２０１１年５月２０日 金曜日 午前１０時５分
dummyhead dummyhead
MAINTENANCE
CYCLONE TYPE
Remove the following:
– Bolt (4 x 6 mm) [1] (3)
– Pre air cleaner case [2]
– Air cleaner guide [3]
– Wing nut [4]
– Air cleaner cover Assy. [5]
– Wing nut [6]
– Element Assy.
– Grommet [7]
– Inner filter (Paper) [8]
– Outer filter (Foam) [9]
Carefully check both filters for holes or tears and
replace if damaged.
Clean the filters if they are to be reused (page 3-9).
Clean the pre air cleaner case and air cleaner guide.
Check that the air cleaner cover packing [10] is in good
condition, replace it if necessary.
Installation is in the reverse order of removal.
• Install the pre air cleaner case by align it the groove
[11] and tab [12] of the air cleaner cover Assy.
LOW PROFILE TYPE
Remove the air cleaner case lid spring [1] and air
cleaner cover [2].
Remove the pre air cleaner element [3].
Carefully check the air cleaner element and replace if
damaged.
Clean the filter if it is to be reused (page 3-9).
Installation is in the reverse order of removal.
3-8
[5]
[1]
[3]
[10]
[12]
[11]
[2]
[2]
[3]
[4]
[6]
[7]
[8]
[9]
[1]