Honda GX160UT2 Manual page 50

62Z4H000.book 5 ページ ２０１１年５月２０日 金曜日 午前１０時５分
dummyhead dummyhead
CHANGE
GEAR TYPE
Remove the breathing bolt [1].
Remove the drain plug bolt [2] and drain plug washer
[3], tilt the engine and drain the oil into a suitable
container.
Please dispose of used oil in a manner that is
compatible with the environment. We suggest you take
used oil in a sealed container to your local recycling
center or service station for reclamation. Do not throw it
in the trash, pour it on the ground, or pour it down a
drain.
Used engine oil contains substances that have
been identified as carcinogenic. If repeatedly left in
contact with the skin for prolonged periods, it may
cause skin cancer. Wash your hands thoroughly
with soap and water as soon as possible after
contact with used engine oil.
Fill the specified amount of recommended engine oil
SAE 10W - 30 is
into the reduction case.
recommended for
general use. Other
OIL CAPACITY: 0.15 Liter (0.16 US qt, 0.13 Imp qt)
viscosities shown in
the chart may be
RECOMMENDED OIL:
used when the
SAE 10W-30
average
API service classification SJ or higher
temperature in your
area is within the
Install the drain plug bolt with new drain plug washer
recommended
and tighten it to the specified torque.
range.
TORQUE: 23 N·m (2.3 kgf·m, 17 lbf·ft)
Install and tighten the breathing bolt securely.
Make sure there are no oil leaks.
MAINTENANCE
[2]/[3] [1]
SAE VISCOSITY GRADES
AMBIENT TEMPERATURE
3-5