Table of Contents
Advertisement
Purpose of this manual
Related manuals
Contents
Trademarks
2 (E)
Manual Structure
This manual is the installation manual of Editing Control Unit BVE-700A.
This manual is intended for use by trained system and service engineers, and
describes the information on installing the BVE-700A.
Beside this Installation Manual, the following manuals are available for the unit.
. . . . . User's Guide (Supplied with BVE-700A)
This manual describes the application and operation of the unit.
. . . . . Operation Manual (Supplied with BVE-700A)
This manual describes the overview, system connection examples, and specifica-
tions of the unit.
. . . . . BKE-701A Installation Manual (Supplied with BKE-701A)
This manual describes the information related to the installation of the unit.
. . . . . BVE-700A/BKE-701A Maintenance Manual (Available on request)
This manual describes the information that premise the service of BVE-700A/
BKE-701A based on components replaced.
. . . . . "Semiconductor Pin Assignments" CD-ROM (Available on request)
This "Semiconductor Pin Assignments" CD-ROM allows you to search for
semiconductors used in B&P Company equipment.
The maintenance manual contains a complete list of semiconductors and their ID
Nos., and thus should be used together with the CD-ROM.
Part number: 9-968-546-XX
This manual is organized by following sections.
Section 1
Installation
This section describes the operating environment, power supply, installation space,
installation of optional board, rack mounting, connectors, input and output signals of
connectors, switch settings on board and LED description.
Section 2
Service Overview
This section describes the cleaning and the capacitor for backing up the data.
Trademarks and registered trademarks used in this manual are follows.
. Ethernet is a registered trademark of Xerox Corporation.
BVE-700A
Advertisement
Table of Contents
