Table of Contents
Advertisement
2-1. Removing/Reinstalling Front Panel
Removal
1. Turn off the main powers of the processor and discon-
nect the AC power cords from the wall outlet.
2. Tighten the four screws (with drop-safe) and remove
the front panel.
B4 x 10
(with drop-safe)
B4 x 10
(with drop-safe)
Front panel
Reinstallation
Insert the front panel securely into the chassis and tighten
the four screws (with drop-safe).
n
To install the front panel, fit the protrusions of the chassis
into the grooves in the front panel.
Grooves
Front panel
Grooves
BVE-700A
Section 2
Service Overview
B4 x 10
(with drop-safe)
Protrusions
Protrusions
2-2. Cleaning
2-2-1. Filter
The filter on the rear of the front panel can easily accumu-
late the dust. Be sure to remove dust by cleaning as
follows.
1. Remove the front panel. (Refer to Section 2-1.)
2. Remove the dust accumulated on the filter with a
vacuum cleaner.
n
Cleaning the filter by washing in water is recommend-
ed when there is a heavy accumulation of dust.
Be sure to dry the filter completely after it has been
washed.
Filter
2-2-2. Fan
Processor is air-cooled by a fan (on side).
If dust has accumulated in the intake of the fan, air is
prevented from flowing smoothly and this may result in a
temperature rise inside the machine. This may have an
adverse effect on performance and the life of the machine.
Cleaning of the fan every month is recommended.
Contact your local Sony Sales Office/Service Center for
information on cleaning the fan.
Fan
2-1 (E)
Advertisement
Table of Contents
