Table of Contents
Advertisement
Purpose of this manual
Related manuals
Contents
Trademark
BKMA-7045
Manual Structure
This manual is the installation manual of the BKMA-7045 Asynchronous Network
I/F Kit.
This manual is intended for use by trained system and service engineers, and
describes the information regarding installation.
Besides this Installation Manual, the following manuals are available for the
BKMA-7045.
. MAV-70XGI/BKMA-7010/7020/7030/7040/7045/7050/7060/7070/PS70
Maintenance Manual Volume 1 (Available on request)
This manual describes the information that premise the service based on parts
replacement (diagnostics, parts replacement, electrical alignment, and circuit
descriptions, etc.).
If this manual is required, please contact your local Sony Sales Office/Service
Center.
. MAV-70XGI/BKMA-7010/7020/7030/7040/7045/7050/7060/7070/PS70
Maintenance Manual Volume 2 (Available on request)
This manual describes the information that premise the service based on parts
replacement (parts list, block diagrams, schematic diagrams, board layouts, etc.).
If this manual is required, please contact your local Sony Sales Office/Service
Center.
. . . . . "Semiconductor Pin Assignments" CD-ROM (Available on request)
This "Semiconductor Pin Assignments" CD-ROM allows you to search for
semiconductors used in Communication System Solutions Network Company
equipment.
Semiconductors that cannot be searched for on this CD-ROM are listed in the
maintenance manual for the corresponding unit. The maintenance manual contains
a complete list of all semiconductors and their ID Nos., and thus should be used
together with the CD-ROM.
Part number: 9-968-546-XX
The following is a summary of all the section for understanding the contents of this
manual.
Section 1
Installation
Explains the overview of the BKMA-7045, how to install the BKMA-7045 to the
MAV-70XGI, and the connector and cable information for peripheral equipment
connections, etc.
Section 2
Service Overview
Explains the function and factory setting of the switches and LEDs on the board and
the specifications of the BKMA-7045.
Ethernet is a registered trademark of Xerox Corporation.
3 (E)
Advertisement
Table of Contents
