Table of Contents
Advertisement
2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm)
from your mouth.
3 Press and hold the PTT button to start the Selective
Call.
4 Release the PTT button to listen.
Talkgroup Call Feature (Conventional
Operation Only)
This feature allows you to define a group of conventional
system users so that they can share the use of a
conventional channel.
Selecting a Talkgroup
1
or
to Tgrp and press the Menu Select button
directly below Tgrp.
The display shows the last Talkgroup that was
selected and stored.
2 Perform one of the following actions:
•
or
to Preset for the preset
preprogrammed Talkgroup.
•
Use the keypad to enter the number of the
corresponding Talkgroup in the list.
3 Press the Menu Select button directly below Sel to
save the currently selected Talkgroup and return to
the Home screen.
4 Press
to return to the Home screen.
Sending a Status Call
This feature allows you to send data calls to the dispatcher
about a predefined status.
Each status can have up to a 14-character name. A
maximum of eight status conditions is possible.
NOTICE:
The radio automatically exits the feature, if the
feature inactivity timer is enabled. You will hear the
Menu Inactive Exit Tone upon feature exit.
1 Perform one of the following actions:
English
53
Advertisement
Table of Contents
