Mode Select Feature; Saving A Zone And A Channel To A Softkey - Motorola ATS 2500p User Manual

• The display shows Searching. Once found, the display
shows the matched channel name and the radio
changes its transmission to the selected channel.
• If the radio is triggered to search for an empty entry, the
display shows Invalid entry. Repeat
again.
• If the entry does not match, the display shows Channel
name not found.Repeat
press or the Back button to exit.

Mode Select Feature

Mode Select allows a long press to save the current zone
and channel of your radio to a programmable button,
keypad button, or a softkey; then once programmed, the
short-press of that button or softkey changes the
transmission to the saved zone and channel.
There are two methods to save the selected zone and
channel:
• Softkeys
• Programmable buttons and keypad buttons (digit 0 to 9)
step 2 to search
step 2 to search again; or
NOTICE:
Your radio must be preprogrammed for you to use
this feature.
Saving a Zone and a Channel to a
Softkey
Five softkeys are available for you to save the frequently
used zone and channel.
1 Toggle from your current zone and channel to the
required zone and channel.
2
or to MS1, MS2 ... or MS5.
3 Press and hold the Menu Select button directly
below one of the softkey (MS1–MS5).
You hear a short, medium-pitched tone when the zone and
channel is saved.
English
47