Using Speed And Distance Mode; Pairing A Pod - Suunto t4c User Manual

5 USING SPEED AND DISTANCE MODE

The
SPEED AND DISTANCE
distance POD with your Suunto heart rate monitor.

5.1 Pairing a POD

To use
SPEED AND DISTANCE
with a Suunto POD.
To pair a POD:
1. In
TRAINING
.
PAIR A POD
2. Press [Mode] to get to the first setting and select the POD type using [Lap +] and
[Light -].
3. Press [Mode] to activate pairing.
4. Turn on the POD while message
Use the same procedure to pair you heart rate transmitter belt.
NOTE: Before you (re)pair your POD or belt, you need to first reset the device by removing
the battery and putting it in backwards (positive side down). Then replace the battery
normally.
28
mode becomes available after you have paired a speed and
mode, you first need to pair your Suunto heart rate monitor
mode, enter the menu ( ) and scroll with [Lap +] until you reach
SET
is displayed.
TURN ON