Carrier 38MGR Series Service Manual page 98

DISASSEMBLY INSTRUCTIONS SIZES 36 AND 48 (CONT)
3 Electrical
parts
98
2) Remove the terminal board
screws (2) and the right-rear
panel screws (15) and then
remove the right-rear panel.
How to remove the electrical
parts.
1) Complete steps 5 and 6
from the "Fan Assembly"
section and all the steps
from the "Panel Plate"
section.
2) Disconnect the fan motor
connector (5p,white) from
the IPM board.
Specifications subject to change without notice.
Terminal Board
Screws
Right-rear
panel screws
Right-rear
panel screws
IPM board PCB board
DC Fan
Driver board
38MGR-04SM