Carrier 38MGR Series Service Manual page 97

DISASSEMBLY INSTRUCTIONS SIZES 36 AND 48 (CONT)
2 Panel plate
38MGR-04SM
6) Remove the front side panel
screw (1), and then remove
the front side panel.
7) Disconnect the fan motor
connectors FAN1 (3p,white)
and FAN2 (3p,white) from
the DC motor driver board.
8) Remove the fan screws and
remove the fan motor.
How to remove the panel plate.
1) Remove the big handle
screws (2), then remove the
big handle and the water
collector.
Specifications subject to change without notice.
Big handle screws
Water collector screws
97