Sony Ericsson P910I User Manual page 36

This is the Internet version of the user's guide. © Print only for private use.
To input latin and numeric characters
1. Select the button representing the characters to input:
- Latin characters
- Numeric characters
2. Tap the keys on the keyboard; the text will be displayed
simultaneously in the text area.
More characters become available if you tap the shift and
caps keys.
Note The numeric keyboard is equipped with a button switching
between full width and half width
and punctuations.
To input Chinese characters
The P910i has two Chinese input methods: Stroke and Pinyin.
Both methods require that you create a character in two steps.
1. Select the button representing the input method:
or Pinyin (the Stroke keyboard is shown by default).
2. Tap one or more components of the character in the character
component area. The selected components are shown in the
element area, and a group of possible character candidates is
shown in the candidates area.
3. Tap the desired character in the candidates area. The
character appears in the text area and the associated
characters are shown in the candidates area.
36 Getting to know your P910i
numerical characters
Stroke
The more you specify the character – the more input you make –
the fewer candidates will be left. If there are more candidates
than can be displayed at once, use the next candidate
previous candidate buttons to scroll.
Text
area
Elements
area
Pinyin keyboard
and the
Candidates
area
Character
components
( )
area