Restoring Data - Sony Ericsson P910I User Manual

This is the Internet version of the user's guide. © Print only for private use.
Preconditions
The must be installed in the PC and the
Sony Ericsson PC Suite
P910i must be connected to the PC via cable.
Note Backup and restore does not work via infrared or
Bluetooth wireless technology.
Performing a backup
To make a backup
1. Turn on your P910i and connect it to the PC via cable.
2. In the PC, click on on the PC taskbar and select
.
and restore
3. Select your P910i in the menu that appears. Several P910is
can be backed up to the same PC.
4. Select and choose what to back up: P910i and/or
Backup
Memory Stick.
5. Click and follow the instructions in the PC and in the
Yes
P910i.
6. The backup is complete.

Restoring data

Lost data or accidentally deleted information in your P910i can
be restored from an earlier backup. A backup from the phone
can only be restored to the phone, and a backup from a Memory
Stick can only be restored to a Memory Stick.
To restore a backup
1. Turn on your P910i and connect it to the PC via cable.
2. In the PC, click on
and restore
3. Select your P910i in the menu that appears. Several P910is
can be backed up to the same PC.
4. Select one of the backups in the list of previously saved
backups and click
Back up
5. Click
Yes
P910i.
6. The restore is complete.
Note Everything in your P910i will be overwritten by the
chosen backup. Once you have clicked Yes to start the restore,
you cannot cancel the procedure.
Note If you have used your Secure Tokens (Secure Access files)
since you made your backup, you must reconfigure these. If you
restore another P910i, you must reconfigure your Secure
Tokens. For more information see 'Secure tokens' on page 176.
on the PC taskbar and select
.
.
Restore
and follow the instructions in the PC and in the
Synchronization and backup
Back up
151