Set The Source Sweep Power Range - Agilent Technologies ESA Series User's/Programmer's Reference

Front Panel
Access: Source, Amptd Step Auto Man

Set the Source Sweep Power Range

:SOURce:POWer:SWEep <rel_ampl>
:SOURce:POWer:SWEep?
Specifies the range of power levels through which the source output will sweep.
Use : SOURce:POWer:STARt to set the power level at the start of the power
sweep. See also : SOURce:POWer:SPAN .
Factory Preset
and *RST: 0 dB
Range: 0 dB to 20 dB
Default Unit: dB
Front Panel
Access: Source, Power Sweep On Off
Output Power Tracking
:SOURce:POWer:TRCKing <integer>
:SOURce:POWer:TRCKing?
Adjusts the tracking of the source output with the spectrum analyzer sweep in the
present resolution bandwidth.
Factory Preset
and *RST: This command is persistent. The term persistent means that the
command retains the setting previously selected, even through a
power cycle.
Range: Integer, 0 to 4095
Remarks: This command is not needed with the 1.5 GHz tracking
generator.
Front Panel
Access:
Source, Man Track Adj
Output Power Tracking Peak
:SOURce:POWer:TRCKing:PEAK
Automatically adjusts the tracking of the source output with the spectrum analyzer
Chapter 5
Remote Command Reference
SOURce Subsystem
349