How To Wear; Factory Reset The Headset - Philips UpBeat SHB2505 User Manual

Battery LED indicator on
Charging case with USB
cable
While charging headset, Blue LED
status as below:
4 blue LED stay on for 75-100% power
2 blue LED stay on and 3rd LED ashes
every second for 50-75% power
1 blue LED stay on and 2nd LED ashes
every second for 25-50% power
1 blue LED ashes every second for
0-25% power

How to wear

5 Factory reset
the headset
If you encounter any pairing or connection
issue, you can follow the following
procedure to factory reset your headset.
On your Bluetooth device, go to the
Bluetooth menu and remove
Philips SHB2505 from the device list.
Turn o the Bluetooth function of your
Bluetooth device.
Put both headset back to charging
case. Hold and press left & right
headset function button for 5 seconds.
Take both headsets from the
charging case, the headset will
power on automatically. There will
be a voice 'Power on' and a voice
'Pairing'.
Then, there will be a voice 'Right
channel' on right headset and 'Left
channel' on left headset after
paring each other. The LED on right
headset ashes in white and blue
for 3 mins. There will be voice
'Connected' from right channel.
Then, the right headset LED
earpiece ashes in white and blue
for 3 mins.
To pair the headset with a Bluetooth
device, turn on the Bluetooth function
of your Bluetooth device, select
Philips SHB2505.