Related Manuals for Philips UpBeat SHB2505
Summary of Contents for Philips UpBeat SHB2505
-
Page 1: User Manual
SHB2505 User manual Register your product and get support at www.philips.com/support... -
Page 2: Table Of Contents
Contents Important safety instructions Hearing Safety General information 2 Your Bluetooth wireless headset What's in the box Other devices Overview of your Bluetooth wireless headset 3 Get started Charge the battery Pair the headset with your Bluetooth device at the rst time Pair the headset with another Bluetooth device... -
Page 3: Important Safety Instructions
1 Important General information safety To avoid damage or malfunction: instructions Caution Do not expose headphones to excessive heat Do not drop your headphones. Hearing Safety Headphones shall not be exposed to dripping or splashing. Do not allow your headphones to be submerged in water. -
Page 4: Your Bluetooth Wireless Headset
Bluetooth wireless headset USB charging cable (for charging only) Congratulations on your purchase, and welcome to Philips! To fully bene t from the support that Philips o ers, register your product at www.philips.com/welcome. With this Philips wireless headset, you Quick start guide can: •... -
Page 5: Overview Of Your Bluetooth Wireless Headset
Overview of your Bluetooth wireless headset Microphone Multi-function buttons LED indicator (headset) Micro USB charging slot LED indicator (charging case) -
Page 6: Get Started
3 Get started • Charging process is veri ed by white LED light on the earpieces. • When the headset is fully charged, the white light goes o . Charge the battery Note Before you use your headset for the rst time, place the headsets in the charging case and charge the battery for 3 hours for optimum battery capacity and lifetime. -
Page 7: Pair The Headset With Your
Pair the headset with your Bluetooth device. Refer to the user Turn on the Bluetooth function on manual of your Bluetooth device. your device, search for “Philips In right headset, it has voice SHB2505” tap to connect. (Please “Connected” and LED stays on refer to P.6) -
Page 8: Use Your Headphones
4 Use your headset Connect the headset to Power on/o your Bluetooth device Operation Task Multi- Turn on the Bluetooth function of function your Bluetooth device. button Take both headsets from the Take both Turn the Headsets charging case, the headset will power headsets headset on. -
Page 9: Led Indicator Status
Call control Operation Task Multi- Low battery level You will hear function (headset). ‘battery low’ on the headset. button The white LED Pick up/hang Right/Left Press once ash twice for up call headset every 3 minutes. Reject an Right/Left Press and incomging hold for 2 headset... -
Page 10: How To Wear
On your Bluetooth device, go to the every second for 50-75% power Bluetooth menu and remove Philips SHB2505 from the device list. 1 blue LED stay on and 2nd LED ashes every second for 25-50% power Turn o the Bluetooth function of your 1 blue LED ashes every second for Bluetooth device. -
Page 11: Technical Data
6 Technical data Headset Music time: 3 hours (additional 9 hrs with charging case) Talk time: 2.5 hours (additional 7 hrs with charging case) Standby time: 60 hours Charging time: 2 hours Rechargeable lithium ion battery: 50 mAh on each earpiece Bluetooth version: 5.0 Compatible Bluetooth pro les: •... -
Page 12: Notice
2013/56/EU which cannot be disposed of with normal household waste. We strongly advise you to take your product to an o cial collection point or a Philips service centre to have a professional remove the rechargeable battery. Inform yourself about the local separate... -
Page 13: Compliance With Emf
However, there is no guarantee that Compliance with EMF interference will not occur in a particular installation. If this equipment does This product complies with all applica- cause harmful interference to radio or ble standards and regulations regarding television reception, which can be exposure to electromagnetic elds. -
Page 14: Frequently Asked Questions
• On your Bluetooth device, delete • The Bluetooth device is out of range. “Philips SHB2505” from the Bluetooth Reduce the distance between your list. headset and Bluetooth device, or • Pair your headset (see ‘Pair the remove obstacles between them. - Page 15 ‘Factory reset the headset’ on • If you are listening to music but sound page 9). only comes from one earpiece: • The other earpiece may be out of For further support, visit battery. For optimal performance, www.philips.com/support. charge both earpiece fully.
- Page 16 ANATEL: www.anatel.gov.br Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured by and is sold under the responsibility of MMD Hong Kong Holding Limited or one of its a liates, and MMD Hong Kong Holding Limited is the warrantor in relation to this product.