Contents 1 Important safety instructions Hearing Safety General information 2 Your noise canceling on-ear Bluetooth headphones What's in the box Other devices Overview of your noise canceling Bluetooth headphones 3 Get started Charge the battery Pair the headphones with your mobile phone 4 Use your headphones Connect to Bluetooth...
Replace only with the same or equivalent type. headphones at high volume and set the volume to a • Use only the Philips airline adapter to connect the safe level. The louder the volume, the shorter the safe headphones to airplane seat jacks. Do not use other listening time is.
2 Your noise canceling on- ear Bluetooth headphones Airline adapter Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product Quick start guide at www.philips.com/welcome. Other devices What's in the box A mobile phone or device (e.g.
Page 6
c Audio jack d LED indicator Power button f Microphone Pairing/Mute button h NFC detection area i Active noise canceling (ANC) on/off button j Active noise canceling (ANC) LED indicator...
The following example shows you how to pair the headphones with your mobile phone. Activate the Bluetooth feature of your Manual pairing mobile phone, select Philips SHB9850NC. Enter the headphones password "0000" Make sure that the headphones are fully (4 zeros) if prompted. For those mobile...
Page 8
Bluetooth 3.0 or higher, no need to enter a password. 10:35 10:36 10:37 Settings Connectivity Settings Settings Connectivity Bluetooth Devices Found Enter Password Philips SHB9850NC **** Bluetooth device 0000 Select Select Select Back Back Back...
4 Use your Voice control • Siri/Google Now: press . headphones Music control • Play or pause music: tap once. Connect to Bluetooth Connect the headphones to a Bluetooth device • Volume up: slide up or slide up and hold. Turn on your mobile phone/Bluetooth device.
Call control Battery is fully charged. The white LED • Pick up/hang up a call: tap once. is off. Wired connection You can also use the headphones with the audio cable provided when the battery is too low. Make sure the headphones turned off •...
ANC LED indicator status (left side Wear your headphones of headphones) Adjust the headband to fit your head. Headphones status Indicator Active noise cancelation The green LED is on. is on. Awareness mode is on. The green LED flashes. Active noise cancelation and The green LED awareness mode is off.
5 Technical data • Music time (ANC enabled with Bluetooth): 16 hours • Talk time (ANC enabled with Bluetooth): 15 hours • Standby time (ANC enabled with Bluetooth): 45 hours • Music and talk time: Unlimited (with audio cable connected) •...
We strongly advise you to take your product to an official collection point or a Philips service centre to have a professional remove the rechargeable battery. Inform yourself about the local separate collection system for electrical and electronic products and rechargeable batteries.
Trademarks Bluetooth The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Gibson Innovations Limited is under license. Other trademarks and trade names are those of their respective owners. Siri Siri is a trademark of Apple Inc., registered in the U.S.
In such case, your headphones are headphones with your mobile phone' on only for music enjoyment. page 5). For further support, visit www.philips.com/ Voice dialing or redialing does not work on support. my mobile phone. Your mobile phone may not support this...
Page 16
Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. 0890 Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V.