Page 1
Designed to fit ear geometry Earbud Flat cable Designed for wireless freedom on the go, these Philips MyJam FreshTones BT earphones feature 14.2mm drivers for big bass and optimal fit designed around ear geometry. Revel in quality sound • 14.2mm speaker drivers for powerful sound and rich bass •...
Contents 1 Important safety instructions Hearing Safety General information 2 Your Bluetooth in-ear headphones What's in the box Other devices Overview of your Bluetooth in-ear headphones 3 Get started Charge your headphones Pair the headphones with your mobile phone 4 Use your headphones Connect the headphones to a Bluetooth device Manage your calls and music...
1 Important safety General information instructions To avoid damage or malfunction: Caution Hearing Safety • Do not expose headphones to excessive heat. • Do not drop your headphones. • Headphones shall not be exposed to dripping or splashing. • Do not allow your headphones to be submerged in water.
Bluetooth and is compatible to the headphones (see 'Technical data' on page 7). Congratulations on your purchase, and Overview of your Bluetooth welcome to Philips! To fully benefit from the support that Philips offers, register your product in-ear headphones at www.philips.com/welcome.
• Finish your call before charging the headphones, as Activate the Bluetooth feature of your connecting the headphones for charging will power the mobile phone, select Philips SHB5250. headphones off. • You can operate the headphones normally during Enter the headset password "0000" (4 charging.
4 Use your Turn the On/off, Press and hold for 4 headphones music/call seconds. headphones off. control » The white LED is on and fades out. Connect the headphones to a Bluetooth device Music control Task Button Operation Turn on your mobile phone/Bluetooth Play or pause On/off, Press once.
Page 10
Low battery level. The white LED flashes 3 times for every 10 seconds until it is out of power. Battery is fully White LED is off. charged.
5 Technical data • Music time: 4.5 hours • Talk time: 4.5 hours • Standby time: 55 hours • Normal time for a full charge: 2 hours • Rechargeable lithium polymer battery (120 mAh) • Bluetooth 4.1, Bluetooth mono support (Headset Profile - HSP, Hands-Free Profile - HFP), Bluetooth stereo supported (Advanced Audio Distribution Profile...
Caution: Changes or modifications made to this Notice for US equipment not expressly approved by Philips This set complies with the FCC rules, Part 15 may void the FCC authorization to operate this and with 21 CFR 1040.10. Operation is subject equipment.
Do not incinerate. Batteries may explode if overheated. • For disposal or recycling information, please contact your local authorities or visit www.recycle.philips.com. Trademarks Bluetooth The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Gibson Innovations Limited is under license.
Make sure the headphones are in pairing mode. AVRCP (see 'Technical data' on page 7). • Follow the steps described in this user manual. For further support, visit www.philips.com/ • Make sure that the LED light flashes blue support. and white alternately before you release the call/music button.
Page 16
Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V. UM_SHB5250_27_EN_V1.0 wk1551...