Table of Contents
Advertisement
Specifications
Item
Description
Adapter FRU number
74Y4084 (Designed to comply with RoHS requirement)
I/O bus architecture
PCIe 1.1
Slot requirement
For the slot priorities, see the PCI adapter placement topic collection for your system.
Cables
Cat 5 unshielded twisted-pair cables
Voltage
3.3 V
Form factor
Short
Maximum number
For the maximum adapters supported, see the PCI adapter placement topic collection for your
system.
Operating system or partition requirements
This adapter is supported for the following versions of the operating systems:
v AIX:
– AIX 7.1 with the 7100-01 Technology Level, or later
– AIX 6.1 with the 6100-07 Technology Level, or later
– AIX 5.3 with the 5300-12 Technology Level, and Service Pack 5, or later
v Linux:
– SUSE Linux Enterprise Server 11 SP1, or later
– SUSE Linux Enterprise Server 10 SP4, or later
– Red Hat Enterprise Linux Version 6.1, or later
– Red Hat Enterprise Linux Version 5.7, or later
– See the Linux Alert site for the support details.
2-Port Asynchronous EIA-232 PCI Adapter (FC 5723; CCIN 5723)
Learn about the specifications for the 2-Port Asynchronous EIA-232 PCI Adapter.
Overview
The feature code (FC) 5723 is a 2-port EIA-232 asynchronous serial communications PCI adapter that can
be installed in the PCI slots. The adapter is based on the PCI Local Bus Specification Revision 2.2
compliant. The adapter is installed in a single slot and is less than a half-size PCI adapter card.
This adapter provides connection for two asynchronous EIA-232 devices. Ports are programmable to
support asynchronous protocols over an EIA-232 interface at line speeds up to 128 Kbps. The two port
adapter provides RJ45 Ethernet ports connected using DB-9 connectors.
This adapter has the following features:
v Exar Dual Async Controller, XR17D152
v EIA-232 compatible
v Supports Xon/Xoff offload
v Supports RTS/CTS or DTR/DSR off-load
v Bus width: 32 bit data and address
9
Managing PCI adapters
Advertisement
Table of Contents
