Contemporary styled instruments for cabin or cockpit mounting (20 pages)
Summary of Contents for NASA Marine STINGRAY Series
Page 1
DESIGNED AND MANUFACTURED IN ENGLAND STINGRAY RANGE ECHO SOUNDER NASA MARINE LTD RoHS BOULTON ROAD 2002/95/EC STEVENAGE HERTS SG1 4QG (01438) 354033...
USING YOUR STINGRAY DUAL ALARM ECHO SOUNDER GENERAL Your depth sounder has been designed to give good results, even under adverse conditions, but to obtain the very best from your instrument, the following hints should be read carefully and followed as far as practicable. The position of the instrument should be at least 2ft.
(Some energy is lost to the hull but the loss in performance is, for most G.R.P . hulls, hardly noticeable) A transom mount is available from your dealer or direct from NASA Marine. Whichever is selected the best location still has to be found.
Page 5
IN HULL TRANSDUCER KIT Fit your echo sounder with a NASA in-hull transducer kit. This contains all the components required to install a standard transducer within the hull of a glass fibre constructed vessel and is accompanied by comprehensive illustrated instructions.
Prior to unpacking this instrument read and fully understand the installation instructions. Only proceed with the installation if you are competent to do so. Nasa Marine Ltd. will not accept any responsibility for injury or damage caused by, during or as a result of the installation of this product.